Submittal Sheet

Dec 2011 Manufactured by Secop for Danfoss - DEHC.402.Q2.22 / 520N0282 1/2
SC18CLX.2
LBP Compressor
R404A/R507
115V 60Hz
General
Code number 104L2198
Approvals UL984
Compressors on pallet 60
Application
Application LBP
Frequency Hz 50 60
Evaporating temperature °F – -49 to 14
Voltage range V – 103 - 127
Max. condensing temperature continuous (short) °F – 131 (140)
Max. winding temperature continuous (short) °F – 257 (275)
Cooling requirements
Frequency Hz 50 60
Application
LBP MBP HBP LBP MBP HBP
90°F – – – F
2
– –
100°F – – – F
2
– –
110°F – – – F
2
– –
Remarks on application:
Motor
Motor type CSR
LRA (rated after 4 sec. UL984), HST | LST A 63.0 –
Cut in Current, HST | LST A 63.0 –
Resistance, main | start winding (77°F) Ω 0.6 3.2
Design
Displacement cu.in 1.08
Oil quantity (type) .oz. 20.3 (polyolester)
Maximum refrigerant charge oz. 45.5
Free gas volume in compressor .oz. 49.4
Weight without electrical equipment lbs. 30.9
Dimensions
Height inch A 8.62
B 8.39
B1 7.60
B2 4.33
Suction connector location, I.D. in. | angle C 0.378-0.385 | 37°
material | comment Cu-plated steel | Al cap
Process connector location, I.D. in. | angle D 0.252-0.259 | 37°
material | comment Cu-plated steel | Al cap
Discharge connector location, I.D. in. | angle E 0.252-0.259 | 37°
material | comment Cu-plated steel | Al cap
Oil cooler connector location, I.D. in. | angle F –
material | comment –
Remarks: Large Fusite®
S = Static cooling normally sufcient
O = Oil cooling
F
1
= Fan cooling 1.5 m/s
(compressor compartment temperature
equal to ambient temperature)
F
2
= Fan cooling 3.0 m/s necessary
SG = Suction gas cooling normally sufcent
– = not applicable in this area