Submittal Sheet

May 2016 DES.D.462.Q2.22 1/2
SC12MLX
MBP Compressor
R404A/R507
115V 60Hz
General
Code number 104L1606
Approvals UL984
Compressors on pallet 60
Application
Application MBP
Frequency Hz 50 60
Evaporating temperature °F – -10 to 45
Voltage range V – 95 - 135
Max. condensing temperature continuous (short) °F – 131 (140)
Max. winding temperature continuous (short) °F – 257 (275)
Cooling requirements
Frequency Hz 50 60
Application
LBP MBP HBP LBP MBP HBP
90°F – – – – F
2
–
100°F – – – – F
2
–
110°F – – – – F
2
–
Remarks on application:
Motor
Motor type CSIR
LRA (rated after 4 sec. UL984), HST | LST A 53.0 –
Cut in Current, HST | LST A 53.0 –
Resistance, main | start winding (77°F) Ω 0.7 2.9
Design
Displacement cu.in 0.78
Oil quantity (type) .oz. 20.3 (polyolester)
Maximum refrigerant charge oz. 45.5
Free gas volume in compressor .oz. 49.4
Weight without electrical equipment lbs. 30.2
Dimensions
Height inch A 8.62
B 8.39
B1 7.60
B2 4.33
Suction connector location, I.D. in. | angle C 0.320-0.327 | 37°
material | comment Copper | Rubber plug
Process connector location, I.D. in. | angle D 0.252-0.259 | 37°
material | comment Copper | Rubber plug
Discharge connector location, I.D. in. | angle E 0.252-0.259 | 37°
material | comment Copper | Rubber plug
Oil cooler connector location, I.D. in. | angle F –
material | comment –
Remarks:
S = Static cooling normally sufcient
O = Oil cooling
F
1
= Fan cooling 1.5 m/s
(compressor compartment temperature
equal to ambient temperature)
F
2
= Fan cooling 3.0 m/s necessary
SG = Suction gas cooling normally sufcent
– = not applicable in this area