Unit installation

1. Install the lamp where you have easy access.

2. Make sure before drilling into equipment that there is nothing in the way that would be damaged.

3. The lamp should be installed a minimum of 2-3 inches, maximum 36 inches away from the coil or pan

surface.

4. When looking for a mounting location try to install the unit away from non UV resistant plastics, rubber,

and other non metallic materials. Shield these components using sheet metal, aluminum tape, or metal con-

duit.

• Electric Drill

• Phillips screwdriver

• Tin snips

• Eye protection

• Tape measure

• Aluminum tape and sealant

• Multimeter