Installation manual

1.
Install the lamp where you have easy access.
2.
Make sure before drilling into equipment that there is nothing in the way that would be damaged.
3.
The lamp should be installed a minimum of 2
-
3 inches, maximum 36 inches away from the coil or pan
surface.
4.
When looking for a mounting location try to install the unit away from non UV resistant plastics, rubber,
and other non metallic materials. Shield th
ese components using sheet metal, aluminum tape, or metal con
-
duit.

Electric Drill
•
Tape measure

Phillips screwdriver
•
Aluminum tape and sealant

Tin snips
•
Multimeter

Eye protection