A. QTY1 I. QTY2 J. QTY3 B. QTY1 G. QTY2 D. QTY4 H. QTY6 F. QTY2 N. QTY12 K. QTY32 L. QTY4 M. QTY12 O .QTY1 E. QTY4 C. QTY2 BOX CONTENTS A.0 B.0 C.0 D.0 E.0 F.0 G.0 H. HEADBORD x1 FOOTBOARD x1 SIDE PANEL x2 LEGS x4 MIDDLE LEG x2 HEADBOARD BRACKET x2 FOOTBOARD BRACKET x2 SUPPORT BRACKET x6 I .0 J .0 K .0 L .0 M 0. N0 . O0 . BOTTOM PANELS X2 WOODEN STABILIZER x3 ALLEN BOLT 1” x28 ALLEN BOLT 2.
STEP: 01 SEE FIGURE 1 INSTALL HEADBOARD BRACKET AND FOOTBOARD BRACKET ON SIDE PANEL. REPEAT. STEP: 02 WHAT YOU WILL NEED B.0 C.0 F.0 G.0 H. K .0 L .0 M 0. N0 . O0 . SEE FIGURE 2 INSTALL ALL 6 SUPPORT BRACKETS (H) ON BOTH SIDE PANELS BY USING THE WASHER AND SCREW IN THE PREDRILLED HOLES. DO NOT TIGHTEN. SLIDE BRACKETS ANDTIGHTEN SCREWS. . FOOTBOARD x1 SIDE PANEL x2 HEADBOARD BRACKET x2 FOOTBOARD BRACKET x2 SUPPORT BRACKET x6 ALLEN BOLT 1” x12 ALLEN BOLT 2.
wHAT YOU WILL NEED STEP 04 05 A.0 D.0 E.0 K .0 O0 . HEADBORD x1 LEGS x4 MIDDLE LEG x2 ALLEN BOLT 1” x16 ALLEN WRENCH x1 ATTACH HEADBOARD TO HEADBOARD BRACKET, USING 4 OF THE 1” ALLEN BOLTS. REPEAT ON OTHER SIDE OF HEADBOARD. J. J. STEP 05 FLIP BED AND SCREW LEGS (D) INTO BOTH THE HEADBOARD AND FOOTBOARD WITH 1” ALLEN BOLT. SCREW IN MIDDLE LEGS (E). CAREFULLY FLIP BED BACK. D. D. E. D. D.
wHAT YOU WILL NEED I. 0 B O T T O M P A N E L X 2 J. 0 W O O D E N S T A B I L I Z E R S X 3 STEP 07A INSTALL THE 3 WOODEN STABILIZERS IN THE SUPPORT BRACKETS. STEP 07B PLACE BOTH BOTTOM PANELS DOWN ONTO SUPPORTS. CARE AND MAINTENANCE PERIODICALLY CHECK YOUR BED FOR ANY LOOSE BOLTS AND SCREWS AND TIGHTEN WHERE NEEDED. IF BED IS DAMAGED, DO NOT USE. CONTACT US FOR REPLACEMENT PARTS. SPOT CLEAN ONLY. AVOID EXCESS MOISTURE.
