Product Manual

4
6. Tab Slot - accepts clamp tab and locks clamp in place.
7. Offset Notch - Used for transferring reference marks. Top
of detector is 2" (50.0 mm) above On-grade.
8. Clamp Slots - Accepts clip-on general purpose clamp.
9. Serial Number / ID Label
10. Battery Door - Sealed battery compartment houses 2 AA or
LR6 batteries. To install batteries, use a coin to open door. Insert
batteries noting plus (+) and minus (-) terminal diagram
NOTE: Power up is in default setting.
Back
Operation
4
10
7
8
6
9