Product Manual

Front

Power / Volume Switch1. - Turns the detector On / Off

and selects volume. Press to turn on. Press and hold for

approximately 1 second to turn off. Pressing switch briey

when the detector is on cycles volume levels of Loud, Off,

and Low. Initial setting is Loud. When sound is Off, 1 beep

indicates laser is detected.

Accuracy Switch2. - Selects detection accuracy. Pressing

switch cycles 2 accuracy options – Fine and Coarse.

LCD Window3. - Front and rear LCD's indicate the detector's

position relative to the laser beam and detector settings.

Reception Window4. - Houses the photocells which detect the

laser signal. Window must be directed toward laser.

Beeper Output 5. - Fast audible signal is detector Too High;

solid is On-grade; slow is Too Low.

Operation