Product Manual

3
Front
Power Switch1. - Turns the detector On and Off. Press to turn
on. Press and hold for approximately 1 second to turn off.
Volume Switch2. - Selects the volume level. Pressing switch
cycles Loud, Off, and Low. Initial setting is Loud. When sound
is Off, 1 beep indicates laser is detected.
Accuracy Switch3. - Selects detection accuracy. Pressing
switch cycles 3 accuracy options – Fine, Medium, and Coarse.
Initial setting is Medium.
LED's4. - Pressing Volume and Accuracy switches at the
same time while the detector is on turns the LED’s on or off.
Five- channel display: Solid Red - High; Flashing Red - High
Fine; Flashing Green - On-grade; Flashing Blue - Low Fine;
Solid Blue - Low.
LCD Window5. - Front and rear LCD's indicate the detectors
position relative to the laser beam and detector settings.
Operation
3
2
1
4
7
5
6