Item Brochure

77
BAGS AND CASES BAGS AND CASES
8
Lath and Stake Bags
Designed to hold your lath and stakes secure
` Carries up to 50 lath or rebar
` Measures 9 x 38 inches (2.54 x 96.52 cm)
` Weighs 0.22 lb (0.10 kg)
8102-01-ORG — 38 inch Lath Carrier
` Carries up to 50 lath or rebar
` Measures 9 x 38 inches (2.54 x 96.52 cm)
` Weighs 0.22 lb (0.10 kg)
8102-00-ORG — Lath Carrier
` Heavy-duty lath carrier features
space inside for any standard
12 inch, five-gallon bucket
` Weighs 1.50 lb (0.68 kg) without
bucket and approx. 3.85 lb
(1.75 kg) with bucket added
8104-20-ORG — Heavy-Duty Bucket Lath Carrier
` Holds 36 or 48 inch (84 or 122 cm)
wood lath
` Features a hand loop, shoulder strap,
and outside pocket
` Weighs 0.80 lb (0.36 kg)
8100-00-ORG — 8 ID x 36 inches Lath Bag
8101-00-ORG — 8 ID x 48 inches Lath Bag
` Holds 24 inch (61 cm) wood lath
` Features a hand loop, shoulder
strap, outside pocket
` 8 inch (20.3 cm) inside diameter
` Weighs 0.40 lb (0.18 kg)
8103-00-ORG — 24 in Lath Bag
8103-20-ORG — 24 in Heavy-Duty Rhinotek Lath Bag
` Use to carry 21 inch (53 cm) or
30 inch (76 cm) flags
` 8093-00-ORG weighs 0.22 lb (0.10 kg)
` 8094-00-ORG weighs 0.28 lb (0.13 kg)
8093-00-ORG — Wire Stake Flag Bag for 21 in Flags
8094-00-ORG — Wire Stake Flag Bag for 30 in Flags
` For 18 inch (46 cm) stakes and rebar
` Measures: 19 x 8 x 12 inches
(48.3 x 20.3 x 30.4 cm)
` Weighs 0.78 lb (0.35 kg)
8090-00-ORG — Bag for 18-inch Wood Stakes
` For 24 inch (61 cm) stakes and rebar
` Measures: 25 x 8 x 12 inches
(63.5 x 20.3 x 30.5 cm)
` Weighs 0.95 lb (0.43 kg)
8092-00-ORG — Bag for 24-inch Wood Stakes
` Same as 8090-00-ORG but with center
partition to separate stakes and hubs
` Weighs 0.88 lb (0.40 kg)
8091-00-ORG — Bag w/ Center Partition for 18 inch Wood Stakes
` Same as 8092-00-ORG but
with center partition to separate
stakes and hubs
` Weighs 1.10 lb (0.50 kg)
8096-00-ORG — Bag w/ Center Partition for 24 inch Wood Stakes
` The main compartment of this bag is constructed of tough Rhinotek
™
material and designed to hold 18 inch stakes or rebar
` Include hammer loop, adjustable strap and brass grommet drain holes
— the 8091-20-ORG features a partition
` Standard bag weighs 1.55 lb (0.70 kg)
` Partitioned bag weighs 1.70 lb (0.77 kg)
8090-20-ORG — Heavy-Duty 18-inch Bag for Stakes or Rebar
8091-20-ORG — Heavy-Duty 18-inch Bag w/ Center Partition
8100-20-ORG — 36 inch Heavy-Duty Lath or Rebar Bag
8101-20-ORG — 48 inch Heavy-Duty Lath or Rebar Bag
` Heavy-Duty Lath Bag but with Rhinotek
material on the bottom and
six inches up the sides
` Designed in two sizes: 8 inches wide by
36 or 48 inches deep
` Both weigh approximately 1.50 lb (0.68 kg)
8092-20-ORG — Heavy-Duty 24-inch Bag for Stakes or Rebar
8096-20-ORG — Heavy-Duty 24-inch Bag w/ Center Partition
` This stake bag is the same as the 8090-20-ORG, but holds 24 inch stakes
` Features a Rhinotek bottom
` Standard bag weighs 1.70 lb (0.77 kg)
` Partitions bag weighs 1.60 lb (0.73 kg)
` Choose between a standard spray can
holder or a holder with updated features
like four pockets for pens/pencils
and a heavy web strap
8098-00-ORG — Standard Spray Can Holder
8098-10-ORG — With Accessory Pockets (shown)