Item Brochure

76
8
BAGS AND CASES
Rover Rods, Robotics and
Prism Pole Tripod Cases
Designed to keep your Rover rod, Robotics role and Prism pole tripods safe and clean
` Store your two-piece rover rod in this hard
shell case and know it’s protected
` Measures 4 ID x 41 in (10.16 ID x 104.14 cm)
` Weighs 3.20 lb (1.40 kg)
8162-20-BLK — GNSS Rover Rod Hard Shell Case
` Designed to protect the rods during
transportation or storage
` This is a flat bag with a 10 inch flap
` Measures 5.5 inches ID x 41 inches long
` Weighs 0.45 lb (0.20 kg)
8162-00-ORG — Rover Rod Carrying Case
` External and internal side pockets
hold extra gear
` Measurements: 6 OD x 46 inches
(15.25 OD x 116.84 cm)
` Weighs 2.50 lb (1.14 kg)
8157-00-ORG — Short Padded System Bag
` External and internal side pockets
hold extra gear
` Measurements: 6 OD x 58 inches
(15.25 OD x 147.32 cm)
` Weighs 2.70 lb (1.23 kg)
8157-01-ORG — Long Padded System Bag
` The heavy-duty material-covered tube holds
one- or two-section poles or rods
` Measures: 65 inches (1.63 m) in length
` Use to protect and carry your pole or rod
` Weighs 5.50 lb (2.50 kg)
8160-20-BLK — Prism Pole Hard Shell Case
8160-00-ORG — Prism or Range Pole Protective Bag
` Protect your prism or range pole from
dirt and moisture
` Measures: 61.5 x 6 in (156.21 x 15.24 cm)
` Fits all SECO and Crain poles
` Weighs 0.68 lb (0.31 kg)
8180-00-ORG — Prism Pole Tripod Bag
` The prism pole tripod bag holds a
prism pole with a tripod attached
` 60 inch (152 cm) long bag has
fold-over flap
` Made from orange nylon Cordura
®
` Weighs 1.08 lb (0.49 kg)
8180-20-ORG — Heavy-Duty Prism Pole Tripod Bag
` Designed to carry a prism pole with
tripod attached
` Has a fold-over flap and shoulder strap
` Made from nylon Cordura
and durable Rhinotek
` Measures: 7.5 ID x 60 inches
(19.1 ID x 152 cm)
` Weighs 1.55 lb (0.70 kg)
` Designed for carrying or storing your
2 meter rover rod
` Measures: 5.5 x 57 in (14 x 140 cm)
` Includes shoulder strap
` Weighs 0.60 lb (0.27 kg)
8160-02-ORG — Snap-Lock 2-Meter Rover Rod Bag
BAGS AND CASES
z
Assorted Rod
Carrying Cases
Designed to keep your One Shot, DE rod, Range pole, LR-STD, LR-PRO and CR rod safe and clean
` Fits either 8 feet or 2.4 meters rod
` Made from quality 1000-denier nylon
` Water-resistant
` Measures: 4.25 x 43 inches (10.8 x 109.2 cm)
` Weighs 0.40 lb (0.18 kg)
91422 — 8 ft One Shot Carrying Case
` Fits 8 ft (2.4 m) rods
` Made from 1000-denier nylon
` Water-resistant
` Measures: 3.5 x 56.5 inches (8.9 x 143.5 cm)
91410 — CR-8 ft/2.4m Carrying Case
` Fits 13 ft/4 m, 16 ft/5 m and 20 ft/6 m rods
` Made from 1000-denier nylon
` Water-resistant
` Measures: 4.25 x 65.5 inches (10.8 x 166.4 cm)
` Weighs 0.45 lb (0.20 kg)
91411 — CR-13/16/20 ft / SVR-16/25 Carrying Case
` This carrying case is made from the highest
quality 1000-denier nylon
` Water-resistant
` Measures: 4.5 x 82 inches (11.4 x 208.3 cm)
` Weighs 0.45 lb (0.20 kg)
91402 — LR-STD/LR-PRO Carrying Case
` This Cordura
®
bag has a reinforced bottom
and a pocket for a sensor bracket
` Shoulder strap is also included
` Measures: 4 x 71 inches (10.16 x 180.34 cm)
` Weighs 0.50 lb (0.23 kg)
8166-01-ORG — Direct Elevation Rod Case
` Textured heavy-duty poly
` Measures 7.5 x 46 inches (19.05 x 116.84 cm)
` Weighs 0.48 lb (0.22 kg)
8170-00-ORG — Range Pole Case