Item Brochure

34
3
MINING, TUNNELING, MONITORING AND RAIL TRAVERSE KITS
Mining, Tunneling, Monitor-
ing and Rail Accessories
` Adapters for bottom plate (4 610 000)
and other various prism systems
PART NO. HEIGHT TIP TYPE WEIGHS
4 410 000 5 mm 5/8 x 11 0.26 lb (0.12 kg)
4 410 001 40 mm Wild-Style 0.31 lb (0.14 kg)
4 410 002 20 mm 10 mm Tip 0.31 lb (0.14 kg)
4 410 000 4 410 001 4 410 002
` Optimal for fast and precise measurement of stopping points
without a tripod and pole
` Designed to sit on different measurement points
` Three different adapters included: angle adapter for placing
on the chamfered edges wall, tip for measuring points with
centering, adapter with depression for curved measurement
points without centering
` Prevents slipping from the point
` The base plate allows all three adapters to rotate freely and is
leveled using a spirit level with two screws quickly and accurately
` At the moment required adapters can not be screwed on the top
4 610 000 — 90 mm Height Bottom Plate
` For concreting as measuring point
` Prisms and reflective target boards without any special adapter can
be attached to the wild-spigot system
` The spigot is galvanized
` Diameter 20 mm, ribbed steel
5 114 150 — 150 mm Convergence Measuring Bolt
5 114 200 — 200 mm Convergence Measuring Bolt
5 114 270 — 270 mm Convergence Measuring Bolt
5 114 350 — 350 mm Convergence Measuring Bolt
` For concreting as measuring point
` For placing a prism or reflective target plate on the 3/8-inch thread,
a plastic adapter is screwed in
` Supplied with a simple plastic cap
` Corrugated steel, 20 mm diameter galvanized
5 115 150 — 150 mm Convergence Measuring Bolt
5 115 200 — 200 mm Convergence Measuring Bolt
5 115 270 — 270 mm Convergence Measuring Bolt
5 115 350 — 350 mm Convergence Measuring Bolt
` The track has a bracket for tram or
track shortened leg to allow the
measurement in grooved rails
` With moving across the track axis
for horizontal alignment
` With strong magnet
5 263 000 — Track Angle for Tram w/ 5/8 inch Threads
5 263 001 — Track Angle for Tram w/ Wild-Style Stud
5 263 002 — Track Angle for Tram w/ 10 mm Stud
` Additional option for protecting the
convergence measuring bolt
` The welded steel ring provides
protection against mechanical
damage of the measuring point
` Must be ordered in conjunction
with convergence bolt
5 114 500 — Steel Ring Protection for
Convergence Measuring Bolt
Walleye Prism System
Lightweight and inexpensive, made to be set up and left for extended periods
FEATURES & BENEFITS
` The Walleye
™
Prism System
accommodates a full size 62 mm
prism (6411-03-BLK) for long
range applications or when a
larger prism is needed
` Rain hood helps keep the
prism clean to ensure continual
measurements over a long
measuring cycle
` The flat bottom of the L-Bracket
is a large 2.3 x 3.4 inch with five
holes for mounting to a variety
of surfaces
` Components available individually
so you can configure your
specific needs
` Center pivot hole is 3/8 inch (9.5
mm), the four screw holes are
4.5 mm OD
` Features include a -40 mm offset,
± 2 mm, ability to pivot in two
axes, stainless-steel locking
` The system is compatible with all
M20 screw-in type prism canisters
` System weighs 1.55 lb (0.70 kg)
APPLICATIONS
` Mining, tunneling,
monitoring and rail
6603-00 — Complete Walleye Prism System with Prism and 5/8 x 11 Adapter
6603-01 — Complete Walleye Prism System with Prism and M8 Adapter
6603-00-050 — L-Bracket Assembly Only
6603-00-005-TMB — Rain Hood Only
6603-00-051 — 5/8 x 11 Adapter with Screw and Washer
6603-01-051 — M8 Adapter with Screw and Washer