Item Brochure
32
3
MINING, TUNNELING, MONITORING AND RAIL
Standard Track Rod
Can be accurately measured over the track center
FEATURES & BENEFITS
` Track rod remeasures the track axis
` Can be accurately measured over
the track center
` The holder for the prism mounted
in the track axis and is rotatable
` When using the prism in the tilt
holder of the measuring point
is 100 mm perpendicular to the
track axis
` Insulation prevents electrical
shorting between the two rails
` The stop on the opposite end
ensures a clean application to the
rail inner edge
` The attack pushes exactly on the
reference height of 14 mm below
the top of rail to rail
` All track benchmarks are supplied
as standard for a track gauge of
1435 mm
APPLICATIONS
` Mining, tunneling,
monitoring and rail
PART NO. TIP TYPE WEIGHS
5 230 000 5/8 x 11 Tip 6.26 lb (2.84 kg)
5 230 001 Wild-Style Tip 6.26 lb (2.84 kg)
5 230 002 10 mm Tip 6.17 lb (2.80 kg)
MINING, TUNNELING, MONITORING AND RAIL
25 mm ‘L-Bar’
Mini Prisms
Choose between copper- or silver-coated prisms
FEATURES & BENEFITS
` Perfect for deformation or mining
surveys, or places where a
permanent mounting is needed
` Features a -25 mm offset and
comes with 10.3 mm ID
mounting hole
` Assembly is constructed of
anodized aluminum and the prism
is water and dust proof
` Choose between copper-coated or
silver-coated prism
` Weighs 0.45 lb (0.20 kg)
APPLICATIONS
` Mining, tunneling,
monitoring and rail
6600-02 — 25 mm ‘L-Bar’ Copper-Coated Mini Prism
6600-05 — 25 mm ‘L-Bar’ Silver-Coated Mini Prism
Small Tilting Mini Prism
Lightweight and inexpensive, made to be set up and left for extended periods
FEATURES & BENEFITS
` All models feature an 86 mm
height and fit Swiss-style male
tips or Quick Release adapters
` 6600-04 features a 25 mm mini
prism for longer distances
up to 2,000 ft (600 m)
` 6600-01 (shown) and 6600-03
feature a 60 mm diamond pattern
sheeting and a 2 mm offset
` Use for distances up to 49 ft (15 m)
APPLICATIONS
` Mining, tunneling,
monitoring and rail
6600-01 — Small Tilting Mini Prism - Diamond Pattern (shown)
6600-03 — Diamond Pattern w/ Crosshairs
6600-04 — 25 mm Mini Prism
Mining, Tunneling Monitor-
ing and Rail Accessories
6602-01 — Rebar Bolt 3/8 x 16 Threads
6602-02 — Rebar Bolt M12 Threads
6602-03 — Rebar Bolt M8 Threads
` Measures 3/4 x 9.9 inches (19.05 x 251.46 mm) long
` Includes a hex bolt used to hammer the bolt in to the surface
` Once installed, remove the hex bolt and install the
6601-Series adapter of your choice
` Choose between 3/8 x 16, M8 or M12 thread patterns
` Weighs 1.25 lb (0.57 kg)
` 6601-Series Quick Release Adapters are made of T-303 stainless steel
with machined threads that attach to corresponding Anchor Bolts
or the 6602-Series rebar bolts
` Weighs 0.10 lb (0.05 kg)
6601-01 — 1/4/ x 20 Threads
6601-02 — 3/8 x 16 Threads
6601-03 — M8 Threads
6601-04 — M12 Threads