Item Brochure

2
NEW SECO PRODUCTS
New Products
PLAN HOLDER
` Plan holder hangs on the back or front of any vehicle seat
` Slots which hold four 6-inch (15.24-cm) diameter plans
` Front pocket accommodates a note pad, phone,
or other small items
` Organizer strap holds pens, pencils, markers,
and other necessary tools
` Available in blue or black
8046-10-BLU — Pages 11 & 75
MIFI HOTSPOT CASE
` Secures any MiFi unit to any GNSS survey pole or prism pole
` This pouch stays in place; it will not slip down the pole
` Easily attaches to pole with metal clamp on case
` A Velcro strap keeps unit safely inside clear pouch
` Inside dimensions 6 x 4.25-inches
` Constructed of heavy-duty Cordura
®
8143-40-FLY — Page 74
HYDRATION PACK
` Mod-U-Lox
®
keeps hydration tube secure on either
strap, allowing access to the bite valve for either
right or left handed use (one on each side)
` Covered with the same fabric and reflective
tape as our safety vest
` Shoulder straps adjust and chest strap has side
buckle release
` Bladder holds up to 2.5 liters (84.5 fl oz) of fluid
8125-60-FOR — Page 74
HEAVY-DUTY COLUMN CLAMP
` Featuring a solid stable design and works with all 5/8 x 11 instruments
` Adjustable column rotates and moves vertically to orient the instrument
when needed and features 12-inches (30.48-cm) of height adjustment
` Includes a 2-inch by 10-ft (5.08-cm x 3.05-m) strap rated for a 2200
pound load and a heavy-duty ratchet
` The center line of the 5/8 x 11 stud to column
measures 15-inches (38.1-cm)
` Constructed of structural aluminum and
stainless steel hardware
4852-16 — Page 63
TRIPOD RADIO ANTENNA KIT
` Kit attaches easily to any surveying instrument tripods
` Clamp will attach to any tripod leg and ram ball and socket section of
clamp quickly sets the antenna pole up vertically
` Kit consists of three antenna sections that set up
the radio antenna pole height to
3.1-ft (0.95-m) above the tripod
` A large washer is included to allow a straight
connection to a tripod for a separate setup
` Kit bag included measures 16 x 6 x 2-inches
2133-06 — Page 4
STANDARD PRECISION (WITH OPTICAL PLUMMET AND
NON-OPTICAL PLUMMET) TRIBRACHS
` SECO now offers Geodesy-MOM tribrachs in the Standard Precision model
` Both models have an error in angle measurement (hysteresis) of 5 cc
` European-made with an effortless locking mechanism for
fast and solid tripod connection
` 5/8 x 11 threaded base plate and 8-minute circular vial
` A center line on each of the leveling screws allows the
user to balance the lengths of the leveling screws
2152-07-BLK — Page 37
2153-07-BLK — Page 37
230 MM SCANNER SPHERE
` Aluminum scanner sphere
` 230 mm diameter, accuracy < 2 mm
` Painted non-glare white
` Female 5/8 x 11 threaded mount
` Center height is 114 mm from bottom flat
6704-001 — Page 43
6704-Series — Page 44
8046-40-NAT — Page 73
8097-30-NAT — Page 74
BAJA STYLE TOOL POUCH AND BUCKET BAG
` Constructed of leather and rugged #8 canvas duck material
` 8046-40-NAT features two front pockets, a deep 9 x 2 x 11-inch pocket
and a leather lined hammer loop
` 8097-30-NAT leather bottom gives the bucket bag
a robust base and includes an open grommet and a
white polypropylene rope handle has a
working load strength of 100 pounds
QUICK RELEASE ADAPTER FOR TX5 AND 3D SCANNERS
` New “Quick Release Adapter” specifically for Trimble TX5 and Faro
Focus 3D scanners
` Quick and safe connection between the scanner instrument and any
tripod with a male 3/8 x 16 thread
` Rotates smoothly on Delrin
®
bearing for orientating the instrument
` Clamp screw is locked to protected from damage
` Built-in 100-min level vial on base
` Base has a setscrew to lock base to tripod head
` Anodized aluminum and stainless steel materials
6703-015 — Page 44
Featured on Page 41
NEW BIRCH WOOD TRIPODS
Featured on Page 80
CHRISNIK MAGNAILS, MAGSPIKES AND MAGHUBS
Featured on Page 11
CRAIN CARGO NET BY BEDNET
Featured on Pages 8 and 9
NEW QUICK RELEASE CLAW COMPONENTS
AND OPEN CLAMP BRACKETS & CRADLES
2014 SECO SURVEYING AND SITE PREP ACCESSORIES