Item Brochure

10
1
GNSS ACCESSORIES VEHICLE ACCESSORIES
GNSS Accessories
and Adapters
` Radio antenna tripod with antenna mast gets your
radio antenna to the desired height
` Telescoped to 7.5-ft (2.3-m) and the tripod can be set
to 5.5-ft (1.7-m) for a total elevation of 13-ft (4-m)
` Aluminum with a male 5/8 x 11 tip
` Tripod is SECO’s 5302-11-ORG
` The antenna mast (see right) can be purchased
separately to convert your own heavy-duty
tripod as well
` Weighs 19.00 lb (8.62 kg)
5300-11 — Hardwood/Fiberglass (shown)
5300-12 — Aluminum
` The height pin, with its 1-mm
accuracy and dual grads
(100ths/mm) is ideal for
measuring antenna heights
` Measures 6.6-feet (2-m)
long and only 16.5-inches
(43-cm) when collapsed
` Weighs 0.30 lb (0.14 kg)
7751-50 — 2-Meter Height Pin
` The open clamp attachment allows quick and easy connection to the
pole; it connects to 1-to-1.25-inch (25.4 to 31.8-mm) OD poles
` Brass male 5/8 x 11 captive stud is easily removed for direct attachment
of the radio antenna to the bar
` Includes a non-slip Velcro
®
cable
strap to help manage radio cables
` Weighs 0.22 lb (0.10 kg)
2133-03 — Antenna Bracket
20 cm
` Bracket holds a radio antenna securely to a tripod leg
` The heavy-duty bracket makes plumbing the antenna easy
` Fits all full-size and heavy-duty tripods and uses a 1/2-inch
long, 5/8 x 11 male stud to secure the antenna or
extension (tripod sold separately)
` Can be used with the SECO Six Foot Snap-Lock Radio
Antenna Pole (5139-02, see right) or any extension with a
male/female 5/8 x 11 connection
` Weighs 1.55 lb (0.70 kg)
2133-05 — Radio Antenna Bracket for Tripod
` Snap locks into a fixed length of 6-feet (1.8-m) and
collapses to 41.5-inches (1-meter)
` Used to elevate a radio antenna to 6 feet plus the height
of the tripod setup
` Comes with a 3.5-inch (8.89 cm)OD plate adapter
(5182-002) to attach to any 5/8 x 11 tripod heads
` Available in standard yellow of fluorescent yellow
` Weighs 1.40 lb (0.62 kg)
5139-02-FLY — 6 Foot Snap-Lock Radio Antenna Pole
` Both magnets have a 3.5-inch
(8.89-cm) diameters
` Weighs 0.92 lb (0.42 kg)
5114-050 — 5/8 x 11 Tip
5114-051 — Quick-Release Tip
` GNSS Compass for
1.25 inch diameter poles
5125-050 — GNSS Compass
` Adapter has male
5/8 x 11 threads
` Weighs 0.08 lb
(0.04 kg)
5113-012 — GNSS Quick-
Release Tip
` Adapter adds 76.22-mm to the
pole length
` Use with 5187-00 GNSS Quick-
Release Adapter
` Optional Stainless
Steel version
` Weighs 0.14 lb
(0.06 kg)
5111-00 — GNSS Quick-Disconnect Adapter
5111-00-SS — GNSS Quick-Disconnect
Adapter (Stainless Steel)
` The 5114-01 includes a quick
release adapter (5111-00)
to allow quicker
attachment of the
GNSS antenna
` Weighs 3.40 lb (1.54 kg)
5114-01 — Triple Mag Mount (shown)
5114-02 — Triple Mag Mount (w/ 5/8 x 11 Tip)
5125-056 — All Terrain Wheel
Add Rover top section:
5125-057-FLY — Aluminum Rod
5128-052 — Carbon Fiber Rod
` All-Terrain Rover Rod “Big Wheel”
` 19 x 1-5/8-inch
` Rod not included with Wheel
` Perfect for RTK profiling
` Weighs 3.80 lb (1.72 kg)
` Anodized aluminum adapter
features a female 5/8 x 11 with
quick release tip
` Adds 23.8-mm to
length of rod
` Optional Stainless
Steel version
` Weighs 0.05 lb
(0.02 kg)
5187-00 — GNSS Quick-Release Adapter
5187-00-SS — GNSS Quick-Release
Adapter (Stainless Steel)
5126-10 — Satellite Stick XL
` The Satellite Stick
™
XL is composed of six,
1-in (2.54-m) OD carbon fiber sections
` Collapses to 1.23-ft (37.5-cm)
` Weighs 2.40 lb (1.09 kg)
` This removable, free-standing tape
measures GNSS antenna height or is
used as a pocket tape
` Dual graduations ft/10ths/100ths
and cm/mm
7752-00 — HI 2 meter GNSS Pocket Rod
` Pole bracket kit holds the Trimble
®
GNSS Pathfinder
®
ProXRT
receiver securely to any standard rover rod
` Includes two pole clamps, one clip and two screws
and the ProXRT is pre-drilled for the extra clip
` Pole clamps are made of machined anodized
aluminum with stainless steel clamp screws
` Fit rover rods with 3/4-inch (1.90 cm) to 1-1/4-in (3.17-cm) diameters
` Weighs 0.40 lb (0.18 kg)
5198-100 — Pole Bracket Kit for Trimble GNSS Pathfinder ProXRT Receiver
` Fits most heavy-duty-type tripods (like the 5203-10-ORG)
after the bolt assembly has been removed
` The mast telescopes to 7.5-ft (2.3-m) - plus your tripod
height for maximum height
` Weighs 2.50 lb (1.13 kg)
5561-20 — Radio Antenna Mast Assembly