Item Brochure

66
PART NO. SIZE
91415 3.5 x 65 in (8.89 x 165.1 cm)
91416 4.5 x 68 in (11.43 x 172.72 cm)
91417 4.5 x 76 in (11.43 x 193.04 cm)
BAGS AND CASES
Rover Rods and
Prism Pole Tripod Cases
Designed to keep your Rover rod, Robotics role and Prism pole tripods safe and clean
` Store your two-piece rover rod in this hard shell case and know it’s protected
` Measures 4 ID x 41 in (10.16 ID x 104.14 cm)
` Weighs 3.20 lb (1.40 kg)
8162-20-BLK — GNSS Rover Rod Hard Shell Case
` External and internal side pockets hold extra gear
` Measurements: 6 OD x 58 inches (15.25 OD x 147.32 cm)
` Weighs 2.70 lb (1.23 kg)
8157-01-ORG — Long Padded System Bag
` The heavy-duty material-covered tube holds one- or two-section poles or rods
` Measures: 65 inches (1.63 m) in length
` Use to protect and carry your pole or rod
` Weighs 5.50 lb (2.50 kg)
8160-20-BLK — Prism Pole Hard Shell Case8160-00-ORG — Prism or Range Pole Protective Bag
` Protect your prism or range pole from dirt and moisture
` Measures: 61.5 x 6 in (156.21 x 15.24 cm)
` Fits all SECO and Crain poles
` Weighs 0.68 lb (0.31 kg)
8180-20-ORG — Heavy-Duty
Prism Pole Tripod Bag
` Designed to carry a prism pole
with tripod attached
` Has a fold-over flap and shoulder
strap
` Made from nylon Cordura and
durable Rhinotek
` Measures: 7.5 ID x 60 inches
(19.1 ID x 152 cm)
` Weighs 1.55 lb (0.70 kg)
Assorted Rod
Carrying Cases
Designed to keep your One Shot, DE rod, Range pole,
LR-STD, LR-PRO and CR rod safe and clean
` Fits 8 ft (2.4 m) rods
` Made from 1000-denier nylon
` Water-resistant
` Measures: 3.5 x 56.5 inches (8.9 x 143.5 cm)
` Weighs 0.30 lb (0.14 kg)
BACK BY POPULAR DEMAND!
This DE Rod Bag, previously discontinued, has been brought back through
customer requests
` Extremely durable Cordura(R) bag with reinforced bottom
` Pocket for a sensor bracket
` Shoulder strap included
` 4 x 71 inch (10.16 x 180.34 cm)
` Weighs 0.5 lb (0.23 kg)
91410 — CR-8 ft/2.4m Carrying Case
8166-01-ORG — Direct Elevation Rod Bag
` Fits 13 ft (4 m), 16 ft (5 m) and 20 ft (6 m) rods
` Made from 1000-denier nylon
` Water-resistant
` Measures: 4.25 x 65.5 inches (10.8 x 166.4 cm)
` Weighs 0.45 lb (0.20 kg)
91411 — CR-13/16/20 ft / SVR-16/25 Carrying Case
` This carrying case is made from the highest quality 1000-denier nylon
` Water-resistant
` Measures: 4.5 x 82 inches (11.4 x 208.3 cm)
` Weighs 0.45 lb (0.20 kg)
91402 — LR-STD/LR-PRO Carrying Case
` Textured heavy-duty poly
` Measures 7.5 x 46 inches (19.05 x 116.84 cm)
` Weighs 0.48 lb (0.22 kg)
8170-00-ORG — Range Pole Case
` CMR Measuring Ruler Cases
` Made from the highest-quality 1000-denier nylon.
` For use with our rugged fiberglass CMR Series Measuring Rulers 90180, 90181 and 90182 on
page 49, and for gopher pole 90520 on page 56.
product shipped from the US warehouse only