Specifications

www.seco-larm.com
3
For remote activation of locks, cameras, etc. from a
desk or other location.
Use in offices, factories, etc.
Portable.
Attractive heavy-duty aluminum case.
Up to 500 ft. range.
Includes rechargeable battery and power adapter.
Compatible with all SECO-LARM 315MHz receivers.
SD-8201GTPE1Q
Green, 1½" diameter, mushroom-cap pushbutton
SD-8202GT-PEQ
Green, 2" square illuminated pushbutton
SD-8103GT-PEQ
Green, small, square illuminated pushbutton
Ideal for hard to wire installations such as cement
wall or brick buildings.
"EXIT" and "SALIDA" silk-screened on plate.
Built-in RF transmitter:
-- Powered by 9VDC (Battery included).
-- Over 68 billion (6.8 x 10
10
) possible codes.
-- Compatible with all SECO-LARM 315MHz
receivers.
-- LED to indicate RF transmission and low battery.
Battery life: Up to 4 years (60 uses per day).
SD-8201GTPE1Q
SD-8202GT-PEQ SD-8103GT-PEQ
*Please turn to page 12 for more RTE plates.
EVP-1SA4P4UL
4 Outputs, 4A Continuous
EVP-1SA4P9UL
9 Outputs, 4A Continuous
EVP-1SA8P16UL
16 Outputs, 8A Continuous
EVP-1SD2P4UL
4 Outputs, 2.5A Continuous
EVP-1SD4P9UL
9 Outputs, 4A Continuous
EVP-1SD6P16UL
16 Outputs, 6A Continuous
Individual status LED indicators.
Individually protected
PTC-type fused outputs.
Includes enclosure, power
charger, and transformer.
EVP-124M6P16Q
16-Output CCTV Power Supply, 6A Continuous
Individual status LEDs.
Individually protected PTC-type fused outputs.
16-output CCTV power supply.
(8 are 12VDC, 8 are 24VAC)
6 Amps.
SK-919TP2D-P
2-Button Desktop
Transmitter
SK-919TP2D-F
2-Button Footswitch
Transmitter
PDM-4G5-P1.1Q
4 Outputs with LEDs.
PDM-9G5-P1.1Q
9 Outputs with LEDs.
Individual status LEDs.
Individually protected
PTC-type fused outputs.
Main power switch
with surge protection.
Includes enclosure
and transformer.
Extra-large
enclosure.
5A, 250VAC main fuse.
SECOPAGE 35EV features:
Monitors up to 2 zones
per premise or vehicle,
plus manual paging.
Connect to burglar or
communications panels.
Range up to 1 mile.
Includes belt-clip
vibrating receiver (E-35RV).
SECOPAGE 35EV
E-35RV
Spare receiver.
Built-in audible & vibrating
function for silent paging.
E-35RD
Spare receiver.
Audible function.
E-35ANT
Use as alternative
to AM or CB antenna.
PH-A1612-GUQ - Glass fuse
PH-A1612-PUQ - PTC fuse
Field selectable 24 or 28 VAC outputs, or OFF via slide
switch.
Selectable 110 or 240VAC input.
Total Supply Current 12A @24VAC.
Output fuses rated at 2A per channel.
Glass fuses conveniently accessible from the front
panel (PH-A1612-GUQ model).
Dual color LED status indicator for each output
(Blue-normal, Red-fault, OFF-not in use)
Equipped with a cable management bracket for
a neat and professional wiring installation.
Removable terminal blocks for easy wiring.
Rack, wall or desk (stackable) mountable.
Built-in surge protection.
UL-approved overheat protected power transformer.
Ventilation holes to prevent heat build-up.
Dimensions (excluding bracket):
(HxWxD) 1.75” x 17.5” x 11.4”
16-port, selectable 24/28VAC, 12A
1U Rack Mount CCTV Power Supply
See Page 8 and Page 14
for more power supplies.
Note: Products with a model number that ends with “Q” or has a green “Q” sticker indicates RoHS compliance.
RF Wireless Controls
24VAC CCTV Power Supplies
12VDC/24VAC CCTV Power Supply
CCTV Power Distribution Boards
Alarm Pager 12VDC CCTV Power Supplies
RF Wireless R-T-E Plates
Rack-Mount CCTV Power Supplies
Power Supplies