Specifications

2009 Condensed Mini Catalog
ENFORCER
®
2
SK-910R
SK-910RA, SK-910RAV
External or internal battery power.
External or internal triggering.
Use to make almost any security output wireless.
Other features and specifications similar to
SK-919TD1S-UP.
SK-919TDWS-BU
SK-910R
11 to 24 VAC/VDC operation,
10A @ 24VDC relay output.
SK-910RA
Mini size, 11 to 24 VAC/VDC, 3A relay output.
SK-910RAV
Mini size, 3 to 13.8 VDC,
5A transistor ground output.
SK-919TD1S-UP
Factory pre-coded.
SK-919TT1S-BU
DIP switch coding.
Sample Application:
Make push-to-exit plate
or keypad wireless.
Leather Pouch for
SK-919TD1S-UP & SK-919TT1S-BU.
Control garage doors, house lights, alarm panels,
or other devices via remote.
Compatible with all SECO-LARM transmitters.
Output is programmable for 4-sec. momentary
(default), 1-sec. momentary, toggle, or validity.
LED indicates RF reception, learn mode entered,
transmitter learned, memory cleared.
315MHz. 433MHz version also available.
For all SECO-LARM
315MHz receivers.
Up to 500-ft. range.
Over 68 billion (6.8 x 10
10
)
possible codes.
LED transmission indicator.
Includes 12VDC alkaline battery.
315MHz. 433MHz version
also available.
SK-910RAV2
SK-910R2
SK-910R2
11 to 24 VAC/VDC operation,
2 x 10A @ 24VDC relay outputs.
SK-910RAV2
Mini size, 3 to 13.8 VDC,
2 x 3A transistor ground outputs.
SK-919TD2A-UP
Factory pre-coded. Over
68 billion (6.8 x 10
10
)
possible codes.
SK-919TD2A-U
Uncoded. Over 68 billion
(6.8 x 10
10
) possible codes.
SK-917T2A-U
CODEBUMP™ codehopping
technology, 18 quintillion codes.

SK-915BA
12VDC Battery for all
transmitters except handheld.
Control garage doors, house lights, alarm panels, or
other devices via remote.
Compatible with all SECO-LARM transmitters.
Outputs are programmable for 4-sec. momentary
(default), 1-sec. momentary, toggle, or validity.
Two LEDs indicate RF reception, learn mode entered,
transmitter learned, memory cleared.
315MHz. 433MHz version also available.
SK-910R4
11 to 24 VAC/VDC operation,
4 x 10A @ 24VDC relay outputs.
SK-919TP4J-NU
Factory pre-coded.
Over 68 billion (6.8 x 10
10
)
possible codes.
SK-917TP4J-NU
CODEBUMP™ codehopping
technology, 18 quintillion codes.
For all SECO-LARM 315MHz receivers.
Up to 500 ft. range.
LED transmission indicator.
Includes 12VDC alkaline battery.
315MHz. 433MHz version also available.
Control garage doors, house lights, alarm
panels, or other devices via remote.
Compatible with all SECO-LARM transmitters.
Outputs are programmable for timed
(1,2,3,4,5,10, 30,and 60 seconds), toggle,
latching, or validity modes.
Four LEDs indicate RF reception, learn mode
entered, transmitter learned, memory cleared.
315MHz. 433MHz version also available.
For all SECO-LARM 315MHz receivers.
Up to 500-ft. range.
LED transmission indicator.
Includes 12VDC alkaline battery.
315MHz. 433MHz version also available.
Extreme Durability
¯
Rubber buttons eliminate damage
caused by electrostatic discharge. Gold-plated battery
clips and contact points extend the life of the transmitter.
Operates up to 500 ft. (150m).
Includes two 3VDC lithium batteries and visor clip.
Compatible with all SECO-LARM receivers.
Slimline design: 3
1
/
2
” x 2
3
/
16
” x
1
/
2
” (89 x 56 x 12 mm).
SK-919TP1H-BU - 1 Button, 1 Channel
SK-919TP2H-NU - 2 Buttons, 3 Channels
SK-919TP4H-NU - 4 Buttons, 15 Channels
SK-9HBC
Belt-clip holster for slimline handheld transmitters.
X-930-089
3-Volt Lithium Battery for handheld transmitters.
Belt-Clip Holster
Battery
SK-91ERSD (1,000-ft. range max.)
Extend range for SECO-LARM RF receivers.
Plugs into receiver.
SK-915LP
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
1-Channel Receivers
2-Channel Receivers 4-Channel Receiver
1-Button Transmitters
Slimline Handheld Transmitters
Wired 1-Button Transmitter
Extended Range Antenna
2-Button Transmitters
4-Button Transmitters