Manual

ENFORCER 4K HDMI
®
Extender over Single Cat5e/6
2 SECO-LARM U.S.A., Inc.
The ENFORCER
4K
HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling
methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6. HDMI
formats as large as 4K can be transmitted up to 197ft (60m) between the two units with zero signal loss by
using integrated circuits in the receiver and transmitter.
 Signal Strength – Active operation ensures that the signal strength will remain strong over the length of
the cable.
 Distance – The 4K HDMI Extender over Single Cat5e/6 is capable of providing a clear HDMI signal up to
197ft (60m) at 4K resolution or 230ft (70m) at 1080p resolution.
 Formats Supported – The 4K HDMI Extender over Single Cat5e/6 supports both progressive and
interlaced formats: 4K@60Hz/4K@30Hz/1080p/1080i/720p/576p/480p/480i.
 Plug and Play – The 4K HDMI Extender over Single Cat5e/6 comes as a complete set consisting of a
transmitter and receiver, power supply, and IR dongles.
 Zero Signal Loss – Integrated circuits in the transmitter and receiver clean, buffer, and amplify the HDMI
signal to prevent signal loss and ensure a clear signal regardless of the length of the cable.
 IR – Send IR signals from the monitor to the source for discrete operation of devices.
 Loop out – Supports a local monitor.
Input
v
ideo signal
3.3V
Input DDC signal
5Vp
-
p (TTL)
Maximum single link range
4K@
6
0Hz
Deep color
8bit
Video formats supported
High
-
speed HDMI, HDCP 2.2
Audio formats supported
LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+,
DolbyTrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Output video
4K@60Hz
Resolutions supported
4K@60Hz/
4K
@30Hz
/1080p/1080i/720p/576p/576i/480p/480i
Range
4K
@
6
0Hz
Cat6:
Up to 1
97
'
(
6
0m)
; Cat5e: U
p to
164
' (
50
m)
1080p
Cat6:
Up to
230
' (
7
0m)
; Cat5e: Up to
164
' (
5
0m)
Video amplifier bandwidth
18
Gbps
Video input connector
HDMI Type A 19
-
pin female
Video output connector
HDMI Type A 19
-
pin female
Cat5e/6
w
iring standard
T
-
568B
IR
Pass
-
through frequency
30~60 kHz
Operating voltage
12VDC
Power supply
1A@12VDC (1 Adapter) (2.1mm plug)
ESD P
rotection (human body model)
±8kV (air
-
gap discharge), ±4kV (contact discharge)
Current draw
Transmitter
85mA@12
VDC
Receiver
125mA@12
VDC
Operating temperature
32°~104° F (0°~40° C)
Operating humidity
20~90% RH (no condensation)
Dimensions
3
7
/
16
"x2
3
/
8
"x
11
/
16
" (88x61x17
mm)
Weight
5.08
-
oz (144g) (each)
1x Transmitter
1x
IR Transmitter (w/ double sided tape)
1x 12VDC power adapter
1x Receiver
1
x IR
Receiver (w/ double sided tape)
1x Manual
Introduction:
Features:
Parts List:
Specifications: