System information

ENFORCER Mini PTZ Camera

SECO-LARM, U.S.A., INC.

PRIVACY ZONE Menu

From DISPLAY SETUP

This menu configures an area of the camera’s field of vision so

that it is covered by a gray mask, hiding it. For instance, this

would be used to cover a neighbor’s window, or a sensitive

window of the office.

Once configured, the gray mas

k automatically appears over that

area every time the camera pans or tilts past it.

MASK NO

UNDEFINED

DISPLAY OFF

CLEAR MASK

CANCEL

PRIVACY ZONE

EXIT

BACK

EDIT MASK Menu

From PRIVACY ZONE

Move the camera to the target area to be masked and choose

NEAR or SAVE. The mask will be displayed as a gray square.

EDIT MASK 1

MOVE TO TARGET POSITION

[NEAR:SAVE /FAR:CANCEL]

Once the mask is displayed:

• Center the camera on the object to be masked.

• Use the joystick or arrow keys to adjust the mask size.

• Select "NEAR" or "SAVE" to save the mask setting.

EDIT MASK 1

[NEAR:SAVE /FAR:CANCEL]

[ ◄►: ADJUST MASK WIDTH]

[ ▲▼: ADJUST MASK HEIGHT]

MASK NO

1~4. Select the mask number. If that mask

was already configured, the camera will

move to the where it was set. Otherwise,

UNDEFINED will be displayed under

MASK NO.

DISPLAY

[ON/OFF] Shows ON if the selected mask

is active, shows OFF if that mask is not

active.

CLEAR MASK

Deletes data in the selected mask.

See EDIT MASK menu below.