Specifications

ENFORCER 365-Day Annual Timer
12 SECO-LARM U.S.A., Inc.
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com
Tel: [phone] Fax: [phone] E-mail: [e-mail]
MiSA-027HQ_1402.docx
Order Part# 763-180%
PITSW1
.docx
Sample Application:
Egress input #1
Egress input #2
12~24
VAC/VDC
First-person-in #1
Backup battery
power input
N.O.
N.C.
COM
First-person-in #2
N.O.
N.C.
COM
Relay
output
#2
Relay
output
#1
Power
supply
Gate operator
Bell
PUSH
TO
EXIT
Wireless receiver
2
Request-to-Exit Plate
Backup battery
(A gate operator connected to the lock
relay output is triggered and opens a gate)
Wireless transmitter
1
1
A wireless initiate device, such as the SK-919TD1S-UP, is triggered.
2
A wireless receiver, such as the SK-910RBQ receives the signal. The receiver’s common terminal is connected to a positive voltage and the normally
closed terminal is connected to the SA-025EQ’s initiate input.