User Manual

ENFORCER VPD Combiners

SECO-LARM U.S.A., Inc. 9

Wiring the Active Midpoint VPD Combiners

(EB-D304-01MQ, EB-D316-60MQ, EB-C304-01MQ and EB-C316-60MQ):

1. Connect cameras to VPD baluns (such as the EB-P101-20VQ) and run them via CAT5e/6 to

the “Camera” ports on the VPD Combiner.

2. Run a CAT5e/6 cable from the “Video Out” port on the VPD Combiner to baluns or a multiple-

channel passive video transceiver on the DVR side.

NOTE: Consult the balun or video transceiver manual for range information.

3. Run a CAT5e/6 cable from the “Data Out” port on the VPD Combiner to the DVR or PTZ

Controller.

Video

ENFORCER

Passive Video

Transceiver

Power

Video

Data and

Power

Video

Power

Cat5e/6

Cat5e/6 (Video)

Cat5e/6 (Data)

Video

ENFORCER

H.264 Network DVR

ENFORCER Passive 4-Channel

Midpoint VPD Combiner

ENFORCER

Passive VPD Balun

ENFORCER Passive

Baluns with Power or

Data Pass-Through

Sample Installation:

NOTE: EB-D304-01MQ shown. EB-C304-01MQ has similar connections. EB-D316-60MQ and EB-C316-60MQ have similar connections,

but have 16 channels.

Monitor