User Manual

ENFORCER VPD Combiners

SECO-LARM U.S.A., Inc. 11

Wiring the Active Endpoint VPD Combiners

(EB-D304-01EQ, EB-D316-60EQ, EB-C304-01EQ and EB-C316-60EQ):

1. Connect cameras to VPD baluns (such as the EB-P101-20VQ) and run them via CAT5e/6 to

the “Camera” ports on the VPD Combiner.

2. Run coaxial cables from the BNC ports on the VPD Combiner to the BNC ports on the DVR.

3. Run a CAT5e/6 cable from the “Data Out” port on the VPD Combiner to the DVR or PTZ

Controller.

Sample Installation:

NOTE: EB-D304-01EQ shown. EB-C304-01EQ has similar connections. EB-D316-60EQ and EB-C316-60EQ have similar connections,

but have 16 channels.

Power

Video

Data and

Power

Cat5e/6

ENFORCER Passive 4-Channel

End-Point VPD Combiner

ENFORCER

Passive VPD Balun

ENFORCER Passive

Baluns with Power or

Data Pass-Through

Video

ENFORCER

H.264 Network DVR

Monitor

Power

Video

Coax

Data