User Manual

ENFORCER VPD Combiners
2 SECO-LARM U.S.A., Inc.
Table of Contents:
Introduction ...................................................................................................................................... 2
Parts List .......................................................................................................................................... 2
Specifications .................................................................................................................................. 3
Overview .......................................................................................................................................... 4
Dimensions ...................................................................................................................................... 5
Installation ....................................................................................................................................... 6
Power Range ................................................................................................................................... 7
RJ45 Connections ........................................................................................................................... 7
Wiring the Passive Midpoint VPD Combiners ................................................................................. 8
Wiring the Active Midpoint VPD Combiners .................................................................................... 9
Wiring the Passive Endpoint VPD Combiners ............................................................................... 10
Wiring the Active Endpoint VPD Combiners .................................................................................. 11
Troubleshooting ............................................................................................................................. 12
Also Available from SECO-LARM ................................................................................................. 12
Warranty ........................................................................................................................................ 12
Introduction:
All ENFORCER VPD Combiners are capable of transmitting the various HD Analog formats such
as HD-AHD, HD-CVI, or HD-TVI. These formats are supported in addition to traditional analog
formats.
ENFORCER VPD Passive Midpoint Combiners are typically installed between the camera and
DVR combining data, video, and camera power via CAT5e/6 cable to simplify installation and allow
for easy expandability and serviceability. The passive combiner allows for the use of any external
ENFORCER low voltage power supply or a compatible third party low voltage power supply.
ENFORCER VPD Active Midpoint Combiners provide the same benefits as the Passive Midpoint
Combiners, but include either an integrated 12VDC or 24VAC (for greater distances) power supply.
ENFORCER VPD Passive Endpoint Combiners are typically installed near the DVR and include
BNC connectors to connect directly to the DVR. This combines data, video, and camera power via
CAT5e/6 cable to simplify installation and allow for easy expandability and serviceability. The
passive combiner allows for the use of any external ENFORCER low voltage power supply or a
compatible third party low voltage power supply.
ENFORCER VPD Active Endpoint Combiners provide the same benefits as the Passive
Endpoint Combiners, but include either an integrated 12VDC or 24VAC (for greater distances)
power supply.
All 16 channel versions are rack mountable or wall/desk mountable.
IMPORTANT: Only low voltage power supplies may be used.
Parts List:
1x VPD Combiner 2x Wall mount brackets 4x Screws for brackets
1
1x Manual
1x Power cord (4ft)
2
1x Spare glass fuse
2
4x Rubber feet
1
16ch models include 6x screws for brackets
2
Powered models only