User Manual

ENFORCER Curtain Sensors
SECO-LARM U.S.A., Inc. 3
When used outdoors, place the curtain sensor under a roof or shelter. This will reduce the
chance of false alarms caused by rain or snow.
To prevent erratic operation and/or false alarms:
 Wind will not directly cause false alarms, but
could cause leaves or similar objects to fly
into or otherwise obstruct the beams. Do
not mount near trees, bushes, or other leafy
vegetation (see Fig. 1).
 Do not mount where water running off the
roof might break the beam (see Fig. 1). The
sensor and beams must be sheltered.
 Do not mount near reflective surfaces, as this
could prevent the sensor from working
properly.
Typical Door/Window
Frame
Windows
Indoor Fence Tops
Garages/Gates/Walls
Skylights
Fig. 1: Beware Natural Interference
Tree or shrub leaves
Rain running directly
off roof thru beams
Important:
Do not connect to power until the sensor is completely installed and the installation has been
double-checked.
Sample Installations:
Choosing a Location: