Specifications

ManualsBrandsSECO-LARM ManualsComputer equipmentDR-116-1.0TQ

NOTE: Products with a model number that ends with “Q” or have a round green “Q” sticker represent RoHs compliant products.

EV-7605-NYWQ (NTSC)

EV-7605-PYWQ (PAL)

Mini PTZ Camera

Manual

 12x Optical zoom and 16x digital zoom

 Up to 192x zoom

 Up to 360°/sec pan/tilt motion

 Outdoor or indoor use

 Up to 256 preset target views, each with

its own characteristics such as white

balance and auto exposure

 Up to 90° tilt, up to 180° with auto-flip

Summary of content (32 pages)

PAGE 1
EV-7605-NYWQ (NTSC) EV-7605-PYWQ (PAL) Mini PTZ Camera Manual     12x Optical zoom and 16x digital zoom Up to 192x zoom Up to 360°/sec pan/tilt motion Outdoor or indoor use  Up to 256 preset target views, each with its own characteristics such as white balance and auto exposure  Up to 90° tilt, up to 180° with auto-flip . NOTE: Products with a model number that ends with “Q” or have a round green “Q” sticker represent RoHs compliant products.
PAGE 2
ENFORCER Mini PTZ Camera Table of Contents: Introduction ..................................................... 2 Features and Functions .................................. 3 Parts List ......................................................... 4 Specifications .................................................. 4 Pan/Tilt Settings .............................................. 4 Dimensions ..................................................... 5 Safeguards and Precautions ...........................
PAGE 3
ENFORCER Mini PTZ Camera Features and Functions: Powerful and Flexible: The ENFORCER Mini PTZ Camera is equipped with a 1/4” CCD, a powerful Day and Night function with mechanical ICR, up to 192x zoom (max. 12x optical zoom and 16x digital zoom), multiple focus modes, and other fully programmable features. Pan/Tilt Functionality: The camera features 360° endless pan motion and 90° tilt. It can be programmed to automatically flip the image if it tilts under the unit.
PAGE 4
ENFORCER Mini PTZ Camera Parts List: 1x Camera 1x Wall-mount bracket 1x Manual 1x Wire harness extension cord 4x Short screws (for attaching camera to bracket) 4x Long screws (for attaching bracket to wall) 4x Screw anchors Specifications: Type CCD Resolution Video output format Effective pixels SSNR (Noise Reduction) SSDR (Dynamic Range) Day/Night OSD Control Protocols Scanning system Sync Video output Lens Zoom Minimum illumination Gamma correction S/N Ratio DSS (Digital Slow Shutter) Shutter control G
PAGE 5
ENFORCER Mini PTZ Camera Dimensions: Camera Side Bottom 6” (152mm) 7” (180mm) 413/16” (122mm) Wall-Mount Bracket Side Bottom 31/8” (80mm) 411/16” (119mm) 61/2” (166mm) SECO-LARM U.S.A., Inc.
PAGE 6
ENFORCER Mini PTZ Camera Safeguards and Precautions: Before Starting: 1. Please read this manual carefully and keep it for future reference. 2. Use the camera within given temperature and electrical limits. 3. Do not point the camera at the sun. Heat could damage the camera, even when not in use. 4. Do not expose the camera to rain or moisture. 5. Do not install the camera in dusty or humid environments. 6.
PAGE 7
ENFORCER Mini PTZ Camera Overview: Wall mount bracket Camera DIP Switches Lens Turn counterclockwise to remove Dome Camera Address DIP Switch and Communication Protocol Setup: Before the Mini PTZ Camera is installed, first set up the DIP switches to configure the camera address. The communication protocol is configured automatically by the camera. 1. Remove the clear dome of the Mini PTZ Camera by turning it counterclockwise by hand. 2.
PAGE 8
ENFORCER Mini PTZ Camera Installation: 1. Connect the camera to either the included wall mount or another optional bracket. 2. Run a 24VAC power supply wire, a video cable with a male BNC connector, and a data wire through the wall to where the camera is to be mounted. 3. Connect the camera's video cable to the video cable coming from the wall. Do not cut the female BNC connector of the camera's video cable as that will void the warranty. 4.
PAGE 9
ENFORCER Mini PTZ Camera Pre-Operation Checklist: Before operating the Mini PTZ Camera, please note the following: :  Double-check that the cables are properly run between the controller and camera, and that all connections are correct.  Double-check that the camera address on the controller is the same as the address of the target camera. The camera address can be found by looking at the camera address DIP switch settings (see page 7) or through the ADDR SETTING menu in the OSD (see page 17).
PAGE 10
ENFORCER Mini PTZ Camera Understanding and Operating Preset and Pattern Functions: Standard Pelco-compatible controllers allow the camera operator to do several functions without going through the full OSD menu, depending on the capabilities of the DVR to which the camera is connected. : The SECO-LARM series of DVRs allows operators to do the following via the "Dome Preset" menu:  Set the camera to remember multiple specific preset locations.  Tell the camera to go to a specific preset location.
PAGE 11
ENFORCER Mini PTZ Camera Configuring Mini PTZ Camera with Enforcer DR-1 Series DVR: :Step 1 Press Dome on the DVR front panel to access DVR controls. Step 2 Press 1 to access the DVR preset menu. Step 3 Use the Up, Down, Left, Right, and Enter buttons to make a selection. Step 4 Go to Preset 95 to access Mini PTZ OSD settings. This will bring up the SPEED DOME CAMERA menu as shown on page 18. SECO-LARM U.S.A., Inc.
PAGE 12
ENFORCER Mini PTZ Camera Reserved Presets: : [82] Pan Preset> [83] [84~87] [88] [89] [90] [91] [92] [95] [98] [99] Start Frame Scan function Clear all Presets Run Pattern function 1~4 Run Preset 1~10 Cruise function Run Preset 11~20 Cruise function Run Preset 21~30 Cruise function Run Preset 31~40 Cruise function Run 360° Random Interval Scan function Enter into OSD menus Run 360° C
PAGE 13
ENFORCER Mini PTZ Camera OSD Display: : Camera Title Action Title CAMERA TITLE PRESET 1 0/42 x1 Pan/Tilt Information Zoom Information Operating the OSD Menus: For operating the OSD menus, please note the following: :     To access the OSD menu from your DVR, go to Preset 95. For more information on DVR presets and their functions for the ENFORCER Mini PTZ Camera, please see page 11, Reserved Presets.
PAGE 14
ENFORCER Mini PTZ Camera Menu Diagram: (see pg. 17) : SETUP MENU SETTING SYSTEM INFORMATION COM ADDRESS SOFTWARE VERSION ADDR TYPE ADDR SOFT ADDR HARD (see pg. 18) ADDR SETTING (see pg. 18) FRAME SCAN MOTION (see pg. 19~20) POWER UP PARK TIME PARK ACTION PATTERN (see pg.
PAGE 15
ENFORCER Mini PTZ Camera Menu Diagram: : SETUP MENU SETTING SETTING OPTIONS OFF CAMERA – MOTION DETECT ON MODE ZOOM TRACK ZOOM SPEED D-ZOOM CAMERA – FOCUS ZOOM POS INIT USER PRESET LENS INIT BRIGHTNESS IRIS SHUTTER CAMERA – EXPOSURE AGC SSNR3 SENS-UP SECO-LARM U.S.A., Inc.
PAGE 16
ENFORCER Mini PTZ Camera Menu Diagram: : SETUP MENU SETTING DAY/NIGHT DIS SYNC IMAGE ADJ CAMERA – SPECIAL MONITOR DISPLAY SETTING OPTIONS AUTO: DWELL TIME: 5~60 SEC DURATION: SLOW / FAST EXT COLOR: BURST LEVEL: 0~100 B/W: BURST MODE: ON / OFF OFF / ON INT H-REV: OFF / ON V-REV: OFF / ON SHARPNESS: ON: LEVEL: 1~31 OFF CRT: PED LEVEL: 0~70 COLOR LEVEL: 1~100 LCD: GAMMA: 0.20~1.0 PED LEVEL: 0~70 COLOR LEVEL: 1~100 USER: GAMMA: 0.20~1.
PAGE 17
ENFORCER Mini PTZ Camera SYSTEM INFORMATION Menu: From MAIN MENU This menu shows the current configuration information of the Mini PTZ Camera. No information can be programmed using this OSD menu.      COM: Displays current serial baud rate, parity, data bits, and stopped position of the camera. ADDRESS: Displays the currently set address. SOFTWARE VERSION: Displays the software version. BACK: Return to previous menu. EXIT: Exit OSD menus.
PAGE 18
ENFORCER Mini PTZ Camera MOTION Menu: From MAIN MENU This menu allows for setting different Mini PTZ movement options such as frame scan, power up operation, and park action.  FRAME SCAN: The camera will pan between two positions at a given angle. SET SCAN POSITION: Set left and right frame scan positions. CLEAR FRAME SCAN: Clear the frame scan positions. – FRAME SCAN SPEED: Set the frame scan speed.  1~32 – BACK: Return to previous menu. – EXIT: Exit OSD menus.
PAGE 19
ENFORCER Mini PTZ Camera MOTION Menu, continued:      PARK TIME: Idle time required before Park Action. – 15~250 seconds PARK ACTION: The camera will perform one of the below actions. – NONE: No action. – AUTO SCAN: Continuous clockwise scan at given tilt and zoom. – RANDOM SCAN: Intermittent clockwise scan at given tilt and zoom. – FRAME SCAN: Continuous scan between two positions. – PRESET 1: Move to the Preset 1 position. – PRESET 8: Move to the Preset 8 position.
PAGE 20
ENFORCER Mini PTZ Camera CAMERA Menu: From MAIN MENU This menu allows for setting different camera options such as SSDR, white balance, backlight, motion detection, and exposure settings. Use the MODE (IRIS OPEN) key to enter submenus in this menu.   20 SSDR: Set dynamic range on or off. ON: Turns SSDR on and enters SSDR sub-menu.  SSDR o 1~15  D-RANGE o NARROW: Set for low light level. o WIDE: Set for high light level.  RETURN : Return to the previous camera menu.
PAGE 21
ENFORCER Mini PTZ Camera CAMERA Menu, continued:    BACKLIGHT: Choose either Back Light Compensation BLC SETUP LEVEL LOW or High Light Compensation. TOP --x------------ 30 – OFF: Turn BLC and HLC off. BOTTOM ------------x-- 75 BLC: Select an area to view clearly, even with a LEFT --x------------ 30 RIGHT ------------x-- 70 strong backlight.
PAGE 22
ENFORCER Mini PTZ Camera MOTION DET Submenu: From Camera Menu This menu allows for setting motion detection options such as area, sensitivity, and smart zoom. Use the MODE (IRIS OPEN) key to enter submenus in this menu.      22 AREA SEL: Select one of up to eight motion detection areas. – AREA1~AREA8 AREA MODE: Turn on or off motion detection for each selected area. ON  TOP o 1~26  BOTTOM o 5~30  LEFT o 1~44  RIGHT o 5~48 – OFF SENSITIVITY: Set the motion detection sensitivity.
PAGE 23
ENFORCER Mini PTZ Camera FOCUS Submenu: From Camera Menu This menu allows for setting focus options such as zoom speed, digital zoom, and user presets. Use the MODE (IRIS OPEN) key to enter submenus in this menu.         MODE: Set the camera focus mode. AUTO: Set the focus automatically.  TELE / WIDE ONE-PUSH: Set the focus as the center of the image.  TELE / WIDE / NEAR / FAR MANUAL: Set the focus manually.  TELE / WIDE / NEAR / FAR ZOOM TRACK: Set the focus to follow the zoom.
PAGE 24
ENFORCER Mini PTZ Camera EXPOSURE Submenu: From Camera Menu This menu allows for setting exposure options such as brightness, auto iris, shutter speed, AGC, and sens-up. Use the MODE (IRIS OPEN) key to enter submenus in this menu.        1 2 24 BRIGHTNESS: Adjust the brightness of the image. – 1~100 IRIS: Set the iris control. – AUTO – MANUAL  IRIS F-NO o F1.6~F28, CLOSE SHUTTER1: Set the shutter control. – ___ – MANUAL  MANUAL o 1/60~1/120,000, x512~x2 – A.
PAGE 25
ENFORCER Mini PTZ Camera SPECIAL Submenu: From Camera Menu This menu allows for setting options such as Day/Night, image reverse, and monitor settings. Use the MODE (IRIS OPEN) key to enter submenus in this menu.    DAY/NIGHT: Set the Day/Night mode. AUTO: The image will automatically switch from color to B/W mode when the ambient light is low.  DWELL TIME o 5~60 SEC  DURATION o SLOW o FAST – EXT: Not used. COLOR: The image will always display in color.
PAGE 26
ENFORCER Mini PTZ Camera SPECIAL Menu, continued:  26 MONITOR: Set the image to perform better on specific CRT MONITOR SETUP PED LEVEL ----x---------- 17 monitor types. COLOR LEVEL -------x------- 50 CRT: Choose for CRT monitors. RETURN  PED LEVEL: Adjust the brightness level. o 0~70  COLOR LEVEL: Adjust the color level. o 1~100 LCD: Choose for LCD monitors.  GAMMA: Adjust the gray value level. o 0.20~1.0  PED LEVEL: Adjust the brightness level. LCD MONITOR SETUP GAMMA 0.
PAGE 27
ENFORCER Mini PTZ Camera CRUISE SETTING Menu: From MAIN MENU This menu allows for setting the dwell time and active presets for the Preset Cruise.    DWELL TIME: Set the amount of time the camera will remain at each preset. – 5~250 SEC PRESET 1~20: Set presets to include in the preset cruise. – ON – OFF BACK: Return to previous menu.
PAGE 28
ENFORCER Mini PTZ Camera DISPLAY SETUP Menu: From MAIN MENU This menu allows for setting display options such as preset labels, zoom information, and pan/tilt information.      PRESET LABEL: Set preset labels on or off. – ON – OFF ZOOM: Set zoom information on or off. – ON – OFF P/T DEG: Set pan/tilt information on or off. – ON – OFF BACK: Return to previous menu. EXIT: Exit OSD menus.
PAGE 29
ENFORCER Mini PTZ Camera PRESET LABEL Menu: From MAIN MENU This menu allows for setting preset labels to be displayed on the main screen.    PRESET: Select which preset to name. – 1~79 SET PRESET LABEL: Set the selected preset label. CLEAR PRESET LABEL: Clear the selected preset label. BACK: Return to previous menu. EXIT: Exit OSD menus.
PAGE 30
ENFORCER Mini PTZ Camera Preset Worksheet: Preset # Example: 1 30 Preset Scene (pan/tilt zoom) Main office (19/57 x1) SECO-LARM U.S.A., Inc.
PAGE 31
ENFORCER Mini PTZ Camera Installation Notes: _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ __________________________________
PAGE 32
ENFORCER Mini PTZ Camera Also Available from SECO-LARM: Ceiling Bracket Pole-Mounting Bracket Corner-Mounting Bracket Flush-Mount Bracket DR-1 Series Digital Video Recorder EV-7100CEILM EV-7100POLEM EV-7100CORNM EV-7100FLUSM DR-116-1.