Manual

Weighing with pre-Tare

If the pre-Tare function is activated, a stored weight value is deducted from the currently

measured weight. This function can be useful if the weight of a dish is not to be included

in the display, for example.

– Press the Start key with no load on the

scale.

se(A, 8.8.8.8.8. and 0 appear con-

secutively in the display. The scale is

then automatically set to zero and ready

for operation.

– While the additional weight is on the

scale, store the weight (e.g. of a dish) by

keeping the Pretare key depressed for

some time).

The tare value remains stored even after

the scale is switched off.

– Now put the item for weighing on the

scale.

The scale determines the weight.

– Briefly pressing the Pretare key sub-

tracts the additional weight from the

measuring result.

You can now perform as many weigh-

ing operations as you like.

– To return to normal weighing mode,

press the Pretare key.

– To switch off the scale, press the Start

key again.

5. Cleaning

Clean the housing as required using a domestic cleaning agent or commercially-available

disinfectant. Follow the manufacturer’s instructions.

Under no circumstances use abrasive or acid cleaners, white spirit, benzene or the like for

cleaning. Such substances can damage the high-quality surfaces.