User guide

Before you get started … • 49
English
WARNING!
Electric shock, suffocation, cuts
Operate and store the printer out of the reach of
children.
− Do not allow children to open the device.
− Route the power supply unit and power
supply cable out of the reach of children.
− Dispose of the plastic wrapping for the device
immediately after unpacking.
CAUTION!
Fire, injuries, damage to device
Set up the printer so that it is adequately
ventilated.
− Set up the printer an adequate distance from
walls and other devices.
− Do not cover the printer with blankets or
cloths.
CAUTION!
Cuts, crushing
− Do not touch any of the moving parts of the
printer such as the paper cutter, gear wheels
or active electrical parts during the printing
process.
− Open and close the paper compartment
cover carefully.
ATTENTION!
Device damage, paper jam, poor print quality
− Ensure that the paper roll is inserted
correctly.
− Use only the paper available from seca.
− Use only undamaged paper rolls.
− Do not stick the ends of paper together, with
adhesive tape for example.
− Do not pull on paper which has already been
inserted once the paper compartment lid is
closed.
4.1 Scope of supply
• Printer and wireless module
• Power supply unit
• SD memory card (in card reader of wireless module)
• seca Print Designer Software configuration