Cut Sheet

SEC Single-Pin Connector Kit
Model SEC 1791-SP
For Copper or Aluminum Stranded Wire
Pin-type quick-disconnect kit with low voltage copper or aluminum conductor cables. Recommended for street,
highway, and flood lighting outdoor locations in wet or dry areas. Model SEC 1791-SP kits are designed to fit
most conductors from number 12 to 4 stranded wire. Conductors are attached with simple screw-lugs for easy,
quick installation. Conductors can be removed and reinstalled. SEC pin kits are designed for 600 volts or less.
REQUIRED TORQUE INCH / POUND
ORDERING INSTRUCTIONS
The same pin connector kit fits most conductor sizes from number 12 to 4 stranded both line and load.
Patent No. 3,874,760
Parts Lists
SEC 1791
-
SP
Single
-
Pin Kit Complete
SEC 1791
-
DS
-
3
Load Pin Body
SEC 1791
-
DSP
-
1
Load Pin Unit
SEC 1791
-
SF
-
6
Line Pin Body
SEC 1791
-
SP
-
1
Line Pin Unit
CAT NO.
WIRE
SIZE
WIRE TYPE
WIRE DIA
RANGE
(IN)
CUTTING
RANGE NO.
TORQUE
(IN-LBS)
SEC
8 RHH, RHW-2, THW, TW, USE-2, XHHW 15/64 1 60
1791-DS-3
6 RHH, RHW-2, THHN, THW, THWN, USE-2, XHHW-2 19/64 1 60
1791-DPS-1
4 THHN, THW, THWN 5/16 1 60
1791-SF-6
4 RHH, RHW-2, USE-2, XHHW-2 23/64 2 60
Listed
Single-Pin Connector Kit
9D70