User guide
9
INSERTING YOUR SPEAKER LINK
Lubricating the easy-CLICK Tip (not needed for open style or custom
earmold).
Lubrication of the easy-CLICK tip on the speaker link is recommended
to ensure a good seal and to facilitate insertion into the ear. Lubricate the
mushroom cap of the tip with a small drop of lubricating gel, as shown in Figure
8. Be careful not to allow any of the gel to penetrate the speaker opening.
• Blue speaker indicates left ear.
• Red speaker indicates right ear.
Hold the speaker link near the speaker with your thumb and forenger on a
vertical plane (see Figure 9). Both the thumb and forenger should be facing
downward and gently insert the easy-CLICK tip into your ear canal.
Next, position the sound processor behind your ear as shown in Figure 10.
If your instrument is equipped with a Sports Lock, place into your ear as shown
in Figure 11.
INSERTING AND REMOVING
YOUR HEARING SYSTEM