Series ENGLISH SEBO automatic For Household Use Only © Copyright SEBO America, LLC • All rights reserved.
SEBO automatic X Series Series Owner’s Manual Table of Contents Technical Details Wiring Diagram Important Safety Instructions Special SEBO Product Features Automatic Power Head Height Adjustment Brush Roller Obstruction – Auto Shut-Off Brush Roller Deterioration Warning Stationary Use Warning Bag Full or Clog Warning – Auto Shut-Off Identification of Parts Assembly Optional Attachments Standard Attachments Operating Instructions Starting the Machine Operating Positions Using the Attachment Tube, Hose & Att
! IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE When using an electrical appliance, basic precautions must always be followed. To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
SPECIAL SEBO PRODUCT FEATURES Your SEBO automatic X series vacuum cleaner is the most technically advanced upright vacuum cleaner in the world. Along with its excellent filtration system (99.9% to 0.3 microns), one of its most important features is its ability to “monitor” the resistance of the brush roller against the floor, so that the proper cleaning height is consistently maintained.
Identification of Parts 1. Handle grip 2. On/Off switch 3. Handle assembly 4. Retaining ring 5. Cover release flap 6. Dust bag housing 7. Front cover 8. Housing release button 9. Power head with brush 10. Cable (cord) 11. Attachment tube handle 42 41 46 43 45 44 24 18 12. Attachment hose 13. Handle catch 14. Carrying handle 15. Cable (cord) hook 16. Attachment tube (active wand) 17. Crevice nozzle 18. Upholstery nozzle 19. Foot pedal 20. Swivel neck 21. Support lever 22. Projection tab 23.
Operating Instructions Starting The Machine A. Before turning on your vacuum cleaner, make sure that the vacuum handle is in its upright locked position and that you have a firm hold on the handle grip to keep the machine from moving forward. 15 2 1. Turn the quick release cable hook (15) to the up position by moving it to the left or right. 2. Release the power cord plug from the power cord and lift the cord off of the upper cord hook (26). 3.
Using the Attachment Tube, Hose & Attachments - Figures 1, 2 & 3 1 12 11 16 6 Figure 1 Figure 2 45 41 The attachment tube (16) is useful for vacuuming corners and hard-to-reach areas. The handle grip (1) should be in the upright, locked position (as shown in figure 1).
Maintenance ! Dust Bag Part #5093 AM Figure 7 Micro-Hygiene Filter Part #5036 AM Figure 8 Always unplug vacuum from outlet before dismantling any part of machine! Changing the Dust Bag - Figure 7 To change the dust bag, pull the cover release flap forward (#5 on page 5) and lift the cover (7) from the dust bag housing. The cover release flap must remain in a forward “pulled-out” position to change dust bags and lock them into place.
Clog Removal ! Always unplug vacuum from outlet before removing any clogs! Clogs in the Airflow Pathway - Figure 12 Figure 12 Most clogs can be removed by accessing the airflow pathway via the orange colored access door (38) located on the underside of the power head. However, other clogs may only be removed by accessing the airflow pathway by disassembling the machine in the opposite sequence of the machine’s original assembly (see assembly, page 5).
Trouble-Shooting Guide ! Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on or machine shuts off intermittently 1. Handle not fully inserted into the bag housing, causing a faulty connection. 1. Release handle catch, push handle down, close handle catch. 2. Not plugged into good outlet. 2. Use another outlet. 3. Cable worn. 3. Replace cable. 4.
White-Gray Machine Pos.
White-Gray Machine Pos.
White-Gray Machine Pos.
SEBO Vacuum Cleaner Warranty Three Years Non-Wear Parts - One Year Labor 1. Your authorized SEBO dealer or SEBO will provide the original product purchaser with replacement of Non-Wear Parts which fail due to a material or workmanship defect for a period of three (3) years from the original date of purchase of new product. The drive belts on a SEBO automatic X machine are guaranteed for the life of the machine. 2.
