User Manual

7




 step 2
Carefully glue, with some drops of thin CA, each of the four hinges in the aileron.




 step 3
Locate the aileron and carefully glue, with some drops of thin CA, each of the four hinges into the
wing panel.




 step 4
Work the aileron up and down some times to work the hinges and check for proper movement.


 step 5
Repeat steps 1 through 4 for the remaining wing panel.
Section 3 – aileron servo & control horn installation




 step 1
Locate the following items included in the hardware pack and the servo.