User Manual

Required radio, motor and battery

Radio equipment:

• Minimum 4-channel radio system

• 4 digital mini servo, recommended JR PROPO DS385 or DS381

• 2 servo extension 400mm, for elevator and rudder servo

• 2 servo extension 100mm, for aileron servo

Recommended electric motor for best performance:

• Hacker A30-14L + X40 SBec-Pro controller + APC 14x8 E

Recommended Li-Po battery pack for best performance:

• Flight Power EVO 2170-3S .….for unlimited 3D

• Flight Power EVO 2500-3S.…..for duration and precision

Additional required item, tools and adhesives

Tools:

• Drill

• Drill bits: 1,5mm, 2mm, 3mm

• Phillips screwdriver

• Hobby knife

• Sanding paper

• Masking tape

• Soldering iron

Adhesives:

• thin CA

• medium CA

Warning

This RC aircraft is not a toy!

If misused, it can cause serius bodily harm and damage to property.

Fly only in open areas, preferably in official flying sites, following all instructions included with

your radio and motor.

This plane is a compromise between Aerobatics and 3D flying, and not a pylon racer.

It is built with a very light structure and for this reason we hardly recommend:

→ Do NOT fly your airplane at high speeds, because this may cause structural

failures or flutter due to the extremely large control surfaces.