User's Manual

PS-3 – Firmware update
78
10 PS-3 – Firmware update
SebaKMT provides regularly updated versions of the firmware at www.sebakmt.com for
all devices. Check and update regularly the firmware of your devices.
In order to determine which firmware version is currently installed on PocketServer,
proceed as follows:
► Tap the button .
► Tap Device info.
► Tap Software.
The firmware version is shown in the Firmware section.
The following is needed:
 Computer with USB interface and internet access
 A USB stick
Procedure:
► Visit www.sebakmt.com and search for the current firmware for the PocketServer
LOG PS-3.
► Download the firmware to the computer.
► Connect the USB stick to the computer.
► Copy the firmware file to the main directory of the USB stick.
► Remove the USB stick from the computer (‘Safely remove hardware’).
► Connect the USB stick to the PocketServer.
► In the PocketServer user interface, tap the button .
► Tap Update.
► Tap LOG PS-3.
A window opens.
► In the list, select the desired firmware file.
► Tap Install.
The update starts.
NOTE
Do not interrupt the process. Do not make any entries until the update is complete.
Turn the PocketServer off and back on after the update.
The firmware update is now complete.
The new firmware version is now displayed in the system settings of the PocketServer
(see above).
Identifying the
firmware version
Downloading
update files
Performing an update