User's Manual

PS-3 – Status & settings
75
 Correlator
Displays whether the PocketServer is enabled for the correlation of measurements.
… enabled
… not enabled
 Network
Displays whether the PocketServer is enabled for managing device networks.
… enabled
… not enabled
Displays the time and date currently set in PocketServer.
8.2 Settings
Various system settings can be customised by the user.
8.2.1 Language
You can change the operating language of the PocketServer user interface.
► From the start screen, tap on the following keys:
► Select your language from the list and confirm with OK.
8.2.2 Region and time zone
For correct functioning of the PocketServer, it is important that the device knows the
region and the time zone in which it is located.
► Tap in the system settings menus on Settings.
► Tap Region.
► Select your region and time zone and confirm with OK.
8.2.3 Transfer rate
For the data transfer between the PocketServer and the devices LOG D-3 / SebaFlow /
TDM 300 / LOG P-3 / LOG P-3 mini, one of the following transfer speeds can be set:
 slow
 fast
Fast transfer is the default setting. Under unfavourable radio conditions, the slow
transmission setting can help reduce the number of data packets lost during transfer.
► Tap in the system settings menus on Settings.
► Tap Data rate.
► Select the desired option from the list and confirm with OK.
8.2.4 Real-time display
When a real-time measurement is performed, the recorded measured values are
displayed ‘live’ in a diagram. By default, each newly recorded value is added to the chart
Time/Date