User's Manual

LOG DX / TDM 200
71
E-mail settings
 Enter the credentials for the sending e-mail account (sender identification, server
address, port, domain, user name, password).
SMS
 active checkbox
Should SMS notifications be issued?
SMS possible
SMS not possible
When this checkbox is deactivated, it is not possible for the device to send alarm or
status messages via SMS.
 Alarm/Status radio buttons:
Select the type of notifications that will be issued:
Only alarms; alarms and 1x status per day; alarms and 1x status per week
 Weekday/Time
Enter the time and weekday for receiving status messages.
 SMS recipients
Enter up to three telephone numbers as SMS recipients.
Example: [phone]
INFO
For detailed explanations of the individual settings, refer to the operating instructions of
the logger/device.
7.11 Export data
You can connect a USB data store to the PocketServer and copy data from the
PocketServer to the USB stick. From the USB stick, the data can then be imported to
the SebaDataView-3 software.
► Connect the USB stick to the USB socket of the PocketServer.
► In the PocketServer start screen, tap LOG DX / TDM 200.
To copy all data of all devices from the PocketServer to the USB stick (measured data,
configuration data, event data, etc.), proceed as follows:
► Tap the button .
► In the context menu, tap Export.
The data is transmitted. A success message appears at the end of the operation.
To copy all data of a specific device from the PocketServer to the USB stick (measured
data, configuration data, event data, etc.), proceed as follows:
► Select the desired device from the Devices list.
► Tap the button .
► In the context menu, tap Export.
The data is transmitted. A success message appears at the end of the operation.
Option 1: Exporting all
data of all devices
Option 2: Exporting all
data of a device