User's Manual

LOG DX / TDM 200
70
Internet settings (APN)
 Enter the data required for internet access (server address, DNS1, DNS2, user
name, password).
FTP
 active checkbox
Should data transfer between the device and FTP server be possible?
FTP function activated
FTP function deactivated
When this checkbox is deactivated, the device cannot upload data to an FTP server
or download data from one.
 FTP configuration Checkbox
Programming via FTP server possible
Programming via FTP server not possible
 Event data checkbox
Regular FTP upload of the ‘Event list’
No upload possible
 FTP step test checkbox
The device will start a ‘Step test’ after the programming
No step test
 Upload time:
Select the time for the daily measured data upload.
If a second measured data upload should take place per day, activate the
2nd upload checkbox and select the time for this upload.
FTP settings
 Enter the access data for the FTP server (server address, port, user name,
password).
E-mail
 active checkbox
Should e-mail notifications be issued?
E-mails possible
E-mails not possible
When this checkbox is deactivated, it is not possible for the device to send alarm or
status messages via e-mail.
 Alarm/Status radio buttons
Select the type of notifications that will be issued:
Only alarms; alarms and 1x status per day; alarms and 1x status per week
 Weekday/Time
Enter the time and weekday for receiving status messages.
 E-mail recipient:
Enter up to two e-mail addresses as recipients.