User's Manual

LOG P-3 / P-3 mini

5.7 GPS position

You can determine and store the GPS data for the location of a logger.

Requirements:

 Your mobile device (smartphone or tablet etc.) must be GPS-capable.

 The GPS function of your mobile device must be activated (location services

activated).

Procedure:

► Go to the installation location of the logger with your mobile device.

► In the PocketServer start screen, tap LOG P-3/LOG P-3-mini.

► Select the desired logger from the Devices list.

► Tap the button .

► In the context menu, tap GPS.

The GPS coordinates of the mobile device are determined and displayed in a dialogue

window. This may take some time. Tap OK to confirm and to save the displayed data in

the PocketServer for the respective logger.

If no coordinates can be determined, an error message appears.

5.8 Programming

INFO

The function ‘Programming devices’ does not belong to the PocketServer basic

equipment. It is only available after acquisition and input of a license key in the device.

To program a logger, proceed as follows:

► In the start screen, tap LOG P-3/LOG P-3-mini.

► Select the desired logger from the Devices list.

► Tap Program.

► You may be prompted to read out the current settings of the logger now. Tap Read.

The connection to the device is established and the data is received by the

PocketServer.

► Open the Measurement settings drop-down menu and enter the desired

parameters:

 Comment

Here you can enter a comment on the device or change the comment.

 Interval

Select the measurement interval.

 Pressure shocks

Should pressure fluctuations (pressure shocks) be recorded?

Then activate the checkbox active. Then, under Threshold, specify the amount of