User's Manual

LOG P-3 / P-3 mini

Metadata

You can display additional information about this data record.

► Tap the button .

► In the context menu, tap File info.

Above the diagram, a new area opens in which the data are listed.

► To hide, tap again on button and then on Hide info.

5.4 Reading out a configuration

You can read out the current configuration of a logger. The measurement and wireless

settings and the general status information of this logger are queried.

► In the start screen, tap LOG P-3/LOG P-3-mini.

► Select the desired logger from the Devices list.

► Tap Settings.

The connection to the logger is established. The data is received from the PocketServer.

On the screen, you will find the data in these drop-down menus:

 Firmware

Currently used firmware version of the logger

 Battery

Battery level (full/good/OK/poor) and battery voltage of the logger

 Time

Internal date and time of the logger (at the readout time)

 Storage

Indicates whether or not the data storage of the device operates as a ‘ring storage’.

 Comments

Displays the comment text that is stored for the logger.

Device info