User's Manual

LOG N-3
36
4.10 Firmware update
SebaKMT provides regularly updated versions of the firmware at www.sebakmt.com for
all devices. Check and update regularly the firmware of your devices.
In order to determine which firmware version is currently installed on a N-3 logger, read
out its configuration.
► In the PocketServer start screen, tap Log N-3
► Tap Single device.
► Select the logger from the Devices list.
► Tap Settings.
The connection to the logger is established. The configuration of the device will be read
out.
The firmware version is shown in the Device info drop-down menu.
The following is needed:
 Computer with USB interface and internet access
 A USB stick
Procedure:
► Visit www.sebakmt.com and search for the current firmware for LOG N-3 loggers.
► Download the firmware to the computer. If it is a packed directory with the extension
.zip, unpack it. The name of the firmware file ends with .ln3
► Connect the USB stick to the computer.
► Copy the unpacked firmware file to the main directory of the USB stick.
► Remove the USB stick from the computer (‘Safely remove hardware’).
► Connect the USB stick to the PocketServer.
► In the PocketServer user interface, tap the button.
► Tap Update.
► Tap LOG N-3.
A window opens with two drop-down lists.
► In the first list, select the firmware file.
► In the second list, select the device to be updated.
► Tap Install.
The update starts.
NOTE
Do not interrupt the process. Do not make any entries until the update is complete.
The connection between PocketServer and device is established. The wireless LED of
the PocketServer lights up blue. The firmware data is transmitted. Progress of the
procedure is displayed on the screen.
Identifying the
firmware version
Downloading
update files
Performing an update