User's Manual

LOG N-3
35
► Tap Realtime view.
► Select the desired option from the drop-down list.
Example: If you select the option Show all, each new recording will be added to the
diagram. All values of the running real-time measurement can be seen in the
diagram.
If you select the option 10 values, only the last 10 recordings are displayed in the
diagram. When each new recording is added, the oldest recording disappears from
the view.
► Confirm with OK.
► With the button, you can return to the real-time measurement. The connection
between PocketServer and the device is immediately re-established and the real-time
measurement is restarted.
4.9 GPS position
You can determine and store the GPS data for the location of a logger.
Requirements:
 Your mobile device (smartphone or tablet etc.) must be GPS-capable.
 The GPS function of your mobile device must be activated (‘location services
activated’).
Procedure:
► Go to the installation location of the logger with your mobile device.
► In the PocketServer start screen, tap LOG N-3.
► Tap Single device.
► Select the desired logger from the Devices list.
► Tap the button .
► In the context menu, tap GPS.
The GPS coordinates of the mobile device are determined and displayed in a dialogue
window. This may take some time. Tap OK to confirm and to save the displayed data in
the PocketServer for the respective logger.
If no coordinates can be determined, an error message appears.