User's Manual Part 1

The Commander

To input comments or similar, a virtual keyboard appears on the screen, which is also

operated with the selector knob.

… deletes last character

… switches between upper- and lower-case

… inserts space

… confirms and completes input

Various menus list the individual loggers of a logger group. This appears in a table-like

form. You are able to re-sort these loggers by the criteria “Comment”, “Time of data

read-out” or “ESA value”. This can be useful for identifying certain loggers straightaway,

e.g. all loggers where a leak is suspected, etc.

To change the sort, apply the Sort button repeatedly. A small triangular symbol in the

header of a column indicates which criterion is selected and whether the loggers are

arranged in descending ▼ or ascending ▲ order.

Examples of possible settings:

“ESA ▼” … sorting by ESA value (descending),

i.e. the loggers with a suspected leak are at the top of the list

“Date/time ▼” … sorting by time of the data read-out (descending),

i.e. the loggers most recently read are at the top of the list

“Date/time ▲” … sorting by time of the data read-out (ascending),

i.e. the loggers not yet read are at the top of the list

Various functions require the identification numbers (IDs) of loggers, repeaters or GSM

boxes to be given. When inputting an ID, all the preceding zero digits can be omitted.

Thus, if the ID is “000815”, you need only enter “815”.

Virtual keyboard

Sorting loggers

Entering an

identification number