User's Manual

Programming the logger
56
Segment Parameter
(Usually, this kind of information can be obtained from the ‘How to
configure an e-mail client’ tutorial on the providers’ website.
Username and password can be specified during the account
setup procedure or can be requested from the operator of the mail
account or from your system administrator. SebaKMT does not
provide e-mail accounts.)
Maybe the access data for your e-mail account are already stored
in the database of the software (see page 39). To use these
stored data, select the Use own server checkbox. The data are
then filled in automatically.
The Seba Demo Mode checkbox offers the chance to use a
demo account run by SebaKMT. The respective data are filled in
automatically. However, the Seba Demo Account is for
demonstration purposes only!
Internet Settings
Enter the data required for internet access (see mobile
communication contract or ask your provider).
If you can find your provider in the Templates drop-down list and
you select it, then the aforementioned data will be entered
automatically.
FTP Settings Enter the Server address, port, user name and password for
the FTP server. (These information can be obtained from your
administrator or your internet service provider.)
Maybe the access data for your FTP server are already stored in
the database of the software (see page 39). To use these stored
data, select the Use own server checkbox. The data are then
filled in automatically.
The Seba Demo Mode checkbox offers the chance to use a
demo FTP server run by SebaKMT. The respective data are filled
in automatically. The logged measuring data will be transferred to
this server. However, the Seba Demo Server is for demonstration
purposes only!