User's Manual

Programming the logger
54
6.4.1 Explanations about the GSM configuration dialogue
The picture shows the GSM configuration dialogue:
You find explanations on the individual segments of the configuration dialogue in the
following table:
Segment Parameter
SIM Card Settings
Enter the PIN code of the SIM card which is being used in the
device (see mobile communication contract or ask your provider).
FTP transfer
If you want the logged data to be transferred to a FTP server
daily, select the Active checkbox. Under Daily upload time you
have the chance to specify the time at which this upload should
take place.
If you wish a second measuring data upload every day, select the
2nd upload checkbox and specify the desired time for this second
upload.
If you select the send Event List checkbox, simultaneously with
the measuring data upload another file is sent to the FTP server
containing the last 100 alarm events and GSM connection
establishments of the device. These information can then be
added to the device’s ‘event list’.
If you want the upcoming measurement to be a StepTest, select
the FTP Step Test checkbox. As a result, the device starts
logging right after having received its configuration data.