Manualshelf

User's Manual

ManualsBrandsSeba Dynatronic Mess- und Ortungstechnik ManualsElectronicsData Logger
51525354555657585960
Programming the logger
52
Step
Description
The input voltage threshold is 2.5 V. Any voltage value below 2.5 V is interpreted
as 0 V while voltages higher than 2.5 V are interpreted as 5 V. In order to ensure
a reliable classification, the actual voltage values should not be too close to 2.5 V.
2 Specify under Alarm Destinations which type of alarm message shall be sent
(SMS and / or e-mail and / or data upload to FTP server) and which
Internal Relay shall switch to trigger the connected device.
3 Confirm and save the settings by clicking the OK button.
A relay cannot be assigned to more than one alarm. If a relay is already included
in an existing channel configuration, it cannot be used in combination with any
other channel or switching input.