User's Manual

Storage / Management of correlations (History)

14.2 Managing stored correlations

In the Correlation Management menu the stored correlations are listed. There, the

corresponding measurement data sets can be called up or managed.

To access the menu, proceed as follows:

Step Description

In the main menu, tap the button .

2 In the displayed menu, tap the Correlation management button.

Result: The menu opens. The stored correlations are listed

14.2.1 Call up and display a correlation

To call up and display a stored correlation, proceed as follows:

Step Description

Select the desired correlation in the list.

4 Tap the Load button.

Result: The measurement data set in question is loaded into the Correlator's

memory (RAM).

In the main menu, tap the button .

Result: With the loaded measurement data, a correlation is performed. The

Correlation menu opens and the correlation curve is displayed. The known

analytical tools are available.

Use the Back button or the ESC pushbutton to return to the Start menu.

Element Description

The floppy disk icon indicates that the "History" mode is active. This means

that currently a stored correlation is loaded and ready to be displayed.

In the upper line can be read whether the loaded correlation is an Online

measurement or Offline measurement.

In the lower line the name of the correlation is shown.

If you tap the large button (floppy disk icon), the loaded correlation is displayed again.

Once you use the arrow buttons to set a measuring mode, the History mode is left and

the loaded measurement dataset is removed from the memory.

Call up a correlation