User's Manual

Storage / Management of correlations (History)

14 Storage / Management of correlations (History)

14.1 Storing a correlation

Every correlation can be saved permanently in the Correlator. This means that the

measurement data of the relevant correlation is written to the Correlator's internal data

base.

Saved correlations can be accessed, displayed and analyzed on the Correlator anytime.

Saved correlations can also be transferred to a computer and processed there using the

CorreluxView software.

If an Online correlation is not saved using the Store button, the corresponding

measurement data is lost once the correlation menu closes. However, the entered pipe

data and GPS coordinates are kept and preserved for the next correlation.

If an Offline correlation is not saved, the corresponding measurement data is lost as

soon as a new Offline measurement is performed.

To store the displayed correlation, proceed as follows:

Step Description

In the Correlation menu, tap on the correlation curve displayed.

Result: The Correlation Analysis menu opens.

2 Tap the Store button.

In the displayed menu, enter a name for this correlation.

If no entry is made, a name is automatically generated. The leading 8 digits

represent the date when the measurement has been performed.

To confirm, tap the ENTER button.

Result: The measurement data is stored in the Correlator. Subsequently, the

Correlation Management menu appears on the screen. There, all stored

correlations are listed.

Use the Back button or the ESCpushbutton to return to the Start menu.

Procedure