User's Manual

Map function
95
Once the pipe net in the map is created, the correlation calculations for all sensor pairs
are automatically updated in the background.
You can display the calculated leak between two sensors in the map. Proceed as
follows:
Step Description
1
Tap the first sensor.
2
Tap the second sensor.
Result: The leak position is marked on the map with a drop icon, provided the
correlation between the two sensors in question found a leak noise.
Example:
The correlation of the line from sensor 5 to 2 results in a leak at the marked
position.
The correlation of the line from sensor 5 to 3 results in a leak at the very
same position.
The correlation of the line from sensor 5 to 1 shows the drop icon right at
sensor 1.
This indicates either that the leak is right at sensor 1 or that the leak is near
sensor 1 but outside the correlated pipeline section.
Show Leak