User's Manual

Online correlation
67
8.3 How to exchange A - B on the screen
In the Correlation menu, the Power transmitter icons and are positioned to the
left and right of the correlation curve. As standard, Power transmitter A is on the left,
Power transmitter B is on the right.
It is possible to exchange the two icons on the screen, when required. Then,
Power transmitter A will be on the right, Power transmitter B will be on the left.
To exchange the Power transmitter icons with each other, proceed as follows.
Step Description
1
In the main menu, tap the button .
2 In the displayed menu, tap the Sensor management button.
Result: The Sensor management menu opens. There, the list of
Power transmitters is shown. If this is not the case, tap the Power Transmitter
tab.
3 Tap the A < > B button.
Result: The sort order of the two Power transmitters in the list is reversed.
Use the Back button or the ESC pushbutton to leave the menu. The changed
setting is accepted and will become effective as soon as a new correlation is performed.
The setting will remain valid until it is changed again in the same way.
Procedure