User's Manual

Sensor management
59
7.5 Additional functions
Using the A < > B button you can reverse the sorting order of the two
Power transmitters A and B in the Online pool. This step has an impact on the
Correlation menu which is shown on the screen when performing an
Online measurement.
Variant 1:
Sorting order A ĺ B
In the Correlation menu, Power transmitter A appears on the left,
Transmitter B appears on the right.
Variant 2:
Sorting order B ĺ A
In the Correlation menu, Power transmitter A appears on the right,
Transmitter B appears on the left.
You can change a Multi sensor's number in the sensor pool. Proceed as follows:
Step Description
1
In the list, tap on the applicable sensor.
2 Tap the Change number button.
3 Answer the question displayed with Yes.
Result: A key pad appears on the screen.
4
Enter the new number for this sensor. A number from 1 to 8 is possible. There
must not be two devices with the same number in the sensor pool.
Confirm with the ENTER button.
Result: The display returns to the sensor pool menu.
The relevant sensor is now shown with the new number in the list.
Change sorting order
of power transmitters
Change a sensor's
number