User's Manual

The Correlator
51
6.6 System settings
By means of the System settings various device settings can be customized to the
needs of the user. Furthermore, the menu provides useful information on the status of
the device and the firmware used.
To access the System settings menu, proceed as follows:
Step Description
1
In the main menu, tap the button .
2 In the displayed menu, tap the System settings button.
Result: The system settings menu is opened.
Use the buttons Next and Previous to browse through the available settlings.
6.6.1 Basic settings
The following basic settings can be made
Line Description
Backlight switch
off
Select a period of time for the backlight until it is switched off
automatically.
Explanation:
If no entry is made, the display light is switched off
automatically after a period of time. Specify the length of this period
here.
If you select never, the backlight will remain on permanently.
Turn off autom.
after
Select a period of time for the Correlator until it is switched off
automatically.
Explanation:
If no entry is made, the device switches itself off
automatically after a period of time. Specify the length of this period
here.
If you select never, the Correlator will remain switched on
permanently.
Key beep
Activate/deactivate the key tone that sounds when a button is
tapped or the rotary encoder is pressed.
Language
Select your language.
Backlight
Auto-OFF
Key beep
Language